Legrand 088069 concealed floor mounting box for concrete
Mounting box for concealed floor installation in concrete, intended for 2 built-in units. Minimum screed height: 65 mm; plastic side walls; detachable...
Розмір
353 mm
Мінімальна висота стяжки
55 mm
Вбудований блок аварійного живлення (Min-Max)
55-250 mm
Підходить для прихованого монтажу в підлозі
Так
Підходить для прихованого монтажу врівень зі стяжкою
Немає
Висота кабель-каналу (Min-Max)
25-48 mm
Ширина кабель-каналу (Min-Max)
75-353 mm
Монтажні отвори для колони (стійки)
Немає
Code: 088080
Legrand 088080 is an adjustable mounting box for concealed floor installation. It supports cable ducts 75–353 mm wide, a screed height from 55 mm, a 55–250 mm built-in emergency power unit range, and a detachable upper section.
9,766.72 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Legrand adjustable mounting box is designed for concealed installation in floors where electrical equipment must be positioned according to the structural conditions of the screed and cable routing. It is intended for use in floor-mounted solutions and helps create a defined installation point for embedded equipment in commercial, office, and infrastructure spaces. The design is suitable where the installation height needs to be adapted to the actual floor build-up rather than fixed to a single dimension.
The box supports a minimum screed height of 55 mm, while the built-in emergency power unit can be accommodated within a 55–250 mm range. This makes the product applicable to projects with different floor constructions and varying mounting depths. The cable duct compatibility is also broad: the system accepts cable ducts with a height of 25–48 mm and a width of 75–353 mm. Such parameters allow integration with a wide range of cable management layouts without changing the mounting concept.
The unit is suitable for concealed floor installation, but it is not designed for flush installation level with the screed. The mounting opening for the built-in module is square, and there are no mounting holes for a column or stand. The side wall material is classified as “other”, so the exact material composition should be considered during project specification. A sealing insert cannot be installed, and the lower plate is not included in the structure.
For easier fitting and adjustment during installation, the upper section can be detached from the lower section. This feature simplifies alignment and preparation of the box within the floor assembly. Overall dimensions are 152 × 428 × 428 mm, with a stated size of 353 mm. These characteristics make the product suitable for organized concealed floor mounting where dimensional flexibility and compatibility with cable ducts are required.
Висота
152 mm
Ширина
428 mm
Глибина
428 mm
Розмір
353 mm
Мінімальна висота стяжки
55 mm
Вбудований блок аварійного живлення (Min-Max)
55-250 mm
Підходить для прихованого монтажу в підлозі
Так
Підходить для прихованого монтажу врівень зі стяжкою
Немає
Висота кабель-каналу (Min-Max)
25-48 mm
Ширина кабель-каналу (Min-Max)
75-353 mm
Монтажні отвори для колони (стійки)
Немає
Монтажний отвір для вбудованого блоку
Квадрат
Кількість одиниць вбудованої техніки
0
Матеріал бокової стінки
Інші
Можливість встановлення ущільнювача
Немає
З можливістю від'єднання верхньої частини від нижньої частини
Так
Нижня пластина
Немає
0 reviews
No reviews for this product yet. Be the first!