ESC226 modular contactor, 25 A, 2 normally closed contacts, 230 V
Modular contactor for remote switching of lighting and other single-phase AC loads in distribution boards. Rated current 25 A, coil voltage 230–230 V...
Кількість полюсів
2
Номінальна напруга
230 V
Номінальний струм
63 A
Номінальний струм витоку
0.03 A
Номінальна напруга ізоляції Ui
250 V
Номінальна імпульсна напруга
4 kV
Спосіб монтажу
DIN-рейка
Тип по струму витоку
A
Code: 402038
Modular Legrand Rx3 differential relay for single-phase 230 V AC circuits. Type A, rated current 63 A, residual current 0.03 A, DIN-rail mounting, screw terminals, IP20.
2,071.88 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Legrand Rx3 differential relay is designed for residual-current protection of electrical circuits and for improving the safety of operation in residential, commercial, and small industrial distribution boards. It disconnects the circuit when a dangerous differential current appears, helping to protect both people and electrical equipment in single-phase installations. The device is suitable for modular panels where connection of both cable and busbar is required.
The unit is rated for a nominal current of 63 A and a nominal voltage of 230 V AC, with an operating range of 180–250 V and a network frequency of 50 Hz. The 2-pole design makes it suitable for single-phase circuits. Type A residual-current detection allows operation with sinusoidal AC and pulsating DC residual currents. The rated residual current is 0.03 A, which is used for enhanced personal and installation protection. The short-circuit breaking capacity (Icw) is 10 kA, while the surge current withstand level is 0.25 kA. The rated insulation voltage Ui is 250 V, and the rated impulse voltage is 4 kV.
Mounting is carried out on a DIN rail, which simplifies installation in standard modular enclosures. The device occupies 2 modules and has compact dimensions of 35.6 × 77.8 × 88.9 mm, with an installation depth of 44 mm. The grey housing corresponds to RAL 7035. The enclosure has IP20 protection and IK04 impact resistance, with a pollution degree of 2. The operating temperature range is from -25 to 60 °C, and storage is allowed from -40 to 70 °C.
Connection is made through screw terminals with support for busbar and cable wiring. The permissible conductor range is 0.75–35 mm² for flexible multi-wire conductors and 0.75–50 mm² for solid conductors. Power can be supplied from the top or from the bottom. The unit includes a locking device, has no selective protection and no short-time delay, and complies with the 1000 V strength test requirement.
Кількість полюсів
2
Номінальна напруга
230 V
Номінальний струм
63 A
Номінальний струм витоку
0.03 A
Номінальна напруга ізоляції Ui
250 V
Номінальна імпульсна напруга
4 kV
Спосіб монтажу
DIN-рейка
Тип по струму витоку
A
Селективний захист
Немає
З короткочасної затримкою відключення
Немає
Відключаюча здатність при короткому замиканні (Icw)
10 kA
Стійкість до імпульсів струму
0.25 kA
Тип напруги
AC
З пристроєм блокування
Так
Частота
50 Hz
Можлива додаткова комплектація
Немає
Ступінь захисту IP
IP20
Кількість модулів
2
Глибина вбудовування
44 mm
Температура навколишнього середовища при експлуатації з (Min-Max)
-25-60 °C
Поперечний перетин багатодротового (гнучкого) провіду, що підключається (Min-Max)
0.75-35 mm²
Перетин підкюченного однодротяного провода (Min-Max)
0.75-50 mm²
RAL-номер (аналогічний)
7035
Вибухозахищені
Немає
Ударостійкість
IK04
Температура зберігання (Min-Max)
-40-70 °C
Номінальна напруга (Min-Max)
180-250 V
Напрямок подачі електрики
Зверху або знизу
Позначення клем
Немає
Відповідність випробуванню на міцність (1000В)
Так
Спосіб приєднання
Гвинтова клема
Тип підключення
Шина та кабель
З полем для напису
Немає
0 reviews
No reviews for this product yet. Be the first!