402025 Rx3 Differential relay 30 mA 40 A 2P AC
2-pole Legrand RX3 residual current device for 230 V AC networks, rated 40 A with 30 mA leakage protection, AC type, DIN-rail mounted, IP20, 2 modules...
Кількість полюсів
4
Номінальна напруга
400 V
Номінальний струм
25 A
Номінальний струм витоку
0.03 A
Номінальна напруга ізоляції Ui
500 V
Номінальна імпульсна напруга
4 kV
Спосіб монтажу
DIN-рейка
Тип по струму витоку
AC
Code: 402062
Legrand RX3 differential relay 4P 25 A 30 mA type AC for DIN-rail installation. Rated voltage 400 V AC, Icw 10 kA, protection degree IP20.
2,242.51 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Legrand RX3 differential relay is designed to protect electrical circuits against leakage currents and is suitable for installation in distribution boards of residential, commercial, and small industrial facilities. It monitors the differential current in the circuit and disconnects the line when a dangerous leakage is detected, helping improve electrical safety during operation. The device is rated for 25 A, 400 V AC, and 50 Hz, so it can be used in compatible three-phase or multi-wire networks.
This model has 4 poles and uses type AC residual-current detection, meaning it responds to sinusoidal alternating leakage currents. The rated residual current is 0.03 A, equivalent to 30 mA, which makes the device suitable for personal protection in standard installations. Short-circuit withstand capability Icw is 10 kA, and surge current immunity is 0.25 kA. The rated insulation voltage Ui is 500 V, while the rated impulse withstand voltage is 4 kV, which defines its electrical endurance within the specified system parameters.
Mounting is performed on a DIN rail, and connection is made with screw terminals. The unit supports both busbar and cable connection, and the power feed can be made from either the top or the bottom, which simplifies arrangement inside the enclosure. Terminal markings are provided, and the device includes a locking mechanism. It also complies with the 1000 V dielectric strength test. The pollution degree is 2, protection degree is IP20, and impact resistance is IK04.
The enclosure is gray, with an equivalent RAL 7035 finish. Overall dimensions are 71.2 × 78.85 × 88.9 mm, installation depth is 44 mm, and the device occupies 4 modules. The operating temperature range is from -25 to +60 °C, while storage conditions are from -40 to +70 °C. Permissible conductor cross-sections are 0.75–35 mm² for flexible multi-strand conductors and 0.75–50 mm² for single-core conductors. The permissible operating voltage range is 340–440 V.
Кількість полюсів
4
Номінальна напруга
400 V
Номінальний струм
25 A
Номінальний струм витоку
0.03 A
Номінальна напруга ізоляції Ui
500 V
Номінальна імпульсна напруга
4 kV
Спосіб монтажу
DIN-рейка
Тип по струму витоку
AC
Селективний захист
Немає
З короткочасної затримкою відключення
Немає
Відключаюча здатність при короткому замиканні (Icw)
10 kA
Стійкість до імпульсів струму
0.25 kA
Тип напруги
AC
З пристроєм блокування
Так
Частота
50 Hz
Можлива додаткова комплектація
Немає
Ступінь захисту IP
IP20
Кількість модулів
4
Глибина вбудовування
44 mm
Температура навколишнього середовища при експлуатації з (Min-Max)
-25-60 °C
Поперечний перетин багатодротового (гнучкого) провіду, що підключається (Min-Max)
0.75-35 mm²
Перетин підкюченного однодротяного провода (Min-Max)
0.75-50 mm²
RAL-номер (аналогічний)
7035
Вибухозахищені
Немає
Ударостійкість
IK04
Температура зберігання (Min-Max)
-40-70 °C
Номінальна напруга (Min-Max)
340-440 V
Напрямок подачі електрики
Зверху або знизу
Позначення клем
Так
Відповідність випробуванню на міцність (1000В)
Так
Спосіб приєднання
Гвинтова клема
Тип підключення
Шина та кабель
З полем для напису
Немає
0 reviews
No reviews for this product yet. Be the first!