Mounting block Schneider Electric Unica System+ 2x2, flush-mounted, white (NU172418)
Блок unica system+ прихована вставка 2х2 білий
Номінальна напруга
230 V
Номінальний струм
20 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP20
Глибина вбудовування
68 mm
Характеристика спрацьовування
C
Code: ADA970D
Hager modular differential breaker for line protection against overload, short circuit, and leakage current. Rated current 20 A, C characteristic, 30 mA, type A, 1+N, 2 modules, IP20.
2,945.80 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This Hager ADA970D differential breaker is intended for protecting single-phase AC circuits against overload, short circuit, and leakage current in residential and small commercial distribution boards. It combines the functions of an automatic circuit breaker and residual-current protection in one modular device, which makes it suitable for line protection where both overcurrent and earth-leakage fault protection are required. The 1+N pole arrangement allows switching of the phase and neutral conductors, improving the practicality of installation and servicing in panel assemblies.
The device is rated for 230 V AC, 50 Hz and a nominal current of 20 A, so it is appropriate for group circuits with moderate load. The C tripping characteristic supports circuits with inrush currents, including branches supplying socket outlets and certain household appliances. The residual operating current is 30 mA, and the leakage type A means the device reacts to alternating residual current as well as pulsating direct residual current, which is important for many modern electrical loads.
The breaker has a short-circuit breaking capacity of 6 kA according to EN 61009-1 and IEC 60947-2. It belongs to current limiting class 3 and has instantaneous tripping without delay. The rated impulse withstand voltage Uimp is 4 kV, while the rated insulation voltage Ui is 500 V. The device is designed for DIN-rail installation in switchboards, with a width of 2 module spaces and a mounting depth of 68 mm.
Connection options include 1–16 mm² for stranded conductors and 1–25 mm² for solid conductors. The housing has an IP20 protection rating, making it suitable for installation inside enclosed electrical panels. The operating temperature range is from -25 to +40 °C, which covers typical indoor conditions. Additional features include simultaneous switching of the neutral conductor and a locking device. The pollution degree is 2 and the overvoltage category is 3, which correspond to standard internal electrical network conditions.
Номінальна напруга
230 V
Номінальний струм
20 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP20
Глибина вбудовування
68 mm
Характеристика спрацьовування
C
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Кількість полюсів (загалом)
2
Ширина в кількості модульних відстаней
2
Клас обмеження струму
3
Характеристика роз`єднання
Без затримки
Тип витоку струму
A
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
6.60 W
Номінальна відмикальна здатність при короткому замиканні Icn згідно EN 61009-1
6 kA
Номінальна відмикальна здатність при короткому замиканні згідно IEC 60947-2
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна ізоляційна напруга Ui
500 V
Виконання захисту від хибних спрацювань
ні
Одночасне перемикання нульового провідника
так
З блокувальним пристроєм
так
0 reviews
No reviews for this product yet. Be the first!