SAT end socket Schneider Electric Asfora bronze (EPH3700169)
SAT РОЗЕТКА КІНЦЕВА ASFORA БРОНЗА
Кількість полюсів
2
Ступінь захисту IP
IP20
Ширина в кількості модульних відстаней
2
Струм короткого замикання Icw
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна напруга
230 V
Номінальна ізоляційна напруга Ui
500 V
Номінальний струм витоку
0.03 A
Code: CDA263D
Hager CDA263D residual current device for two-pole protection of 230 V AC circuits against leakage currents. Rated current 63 A, residual current 30 mA, type A, DIN-rail mounting, 2 modules, IP20.
2,141.36 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager CDA263D is a residual current device designed to disconnect circuits when leakage current appears, helping reduce the risk of electric shock in residential and commercial electrical installations. It is a two-pole unit intended for AC networks with a rated voltage of 230 V and a frequency of 50 Hz, which makes it suitable for protection of single-phase lines and circuits where residual current control is required. The rated current is 63 A, while the rated residual operating current is 0.03 A, corresponding to 30 mA sensitivity.
This device belongs to type A, meaning it responds to sinusoidal alternating residual currents and pulsating direct residual currents. Such characteristics are important in circuits with household appliances and electronic loads, where the leakage current pattern may differ from purely sinusoidal AC. The rated short-circuit current Icw is 6 kA, and the surge current withstand capability is 0.25 kA. Additional electrical characteristics include an insulation voltage Ui of 500 V and a rated impulse withstand voltage Uimp of 4 kV.
Mounting is carried out on a DIN rail, which is standard for distribution boards and simplifies integration with other modular devices. The housing width is 2 modular spaces, and the installation depth is 70 mm. The enclosure provides IP20 protection and is assigned pollution degree 2. The device is not selective and does not have short-time delayed tripping. A locking device is included, and additional accessories can be installed.
Connection is permitted with solid conductors from 1 to 25 mm² and stranded conductors from 1 to 16 mm². The operating ambient temperature range is from -25 to 40 °C. Power loss is 8.10 W. With its 2-pole design, 63 A rated current, 30 mA sensitivity, and type A tripping behavior, this RCD is appropriate for input and branch circuits where leakage-current protection must be maintained under standard low-voltage operating conditions.
Кількість полюсів
2
Ступінь захисту IP
IP20
Ширина в кількості модульних відстаней
2
Струм короткого замикання Icw
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна напруга
230 V
Номінальна ізоляційна напруга Ui
500 V
Номінальний струм витоку
0.03 A
Номінальний струм
63 A
Глибина вбудовування
70 mm
Номер RAL (аналогічний)
7005
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Вибухозахищений
ні
Селективний захист
ні
Короткочасне затримане спрацьовування
ні
Можливе додаткове обладнання
так
Метод монтажу
DIN-рейка
З блокувальним пристроєм
так
Тип напруги
Змінний струм
Тип витоку струму
A
Частота
50 Гц
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
8.10 W
0 reviews
No reviews for this product yet. Be the first!