Mounting block Schneider Electric Unica System+ concealed installation 2×5, antibacterial (NU171020)
Блок unica system+ прихована вставка 2х5 антибактеріальний
Кількість полюсів
4
Ступінь захисту IP
IP20
Ширина в кількості модульних відстаней
4
Струм короткого замикання Icw
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна напруга
400 V
Номінальна ізоляційна напруга Ui
500 V
Номінальний струм витоку
0.03 A
Code: CDA425D
Hager CDA425D four-pole residual current device for 400 V AC networks, rated at 25 A and 30 mA, type A, DIN-rail mounted, 4 modules wide.
2,205.32 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager CDA425D is a residual current device designed for protection of electrical circuits in distribution boards used in residential, commercial, and other low-voltage installations. It monitors leakage current and disconnects the line when a dangerous fault current appears, helping to reduce the risk of electric shock and insulation failure. The unit is intended for AC networks with a rated voltage of 400 V and frequency of 50 Hz.
This model has four poles, a rated current of 25 A, and a rated residual operating current of 30 mA. Such parameters make it suitable for protecting group circuits where timely disconnection is required in the event of earth leakage. Type A residual current detection allows the device to respond not only to sinusoidal AC leakage current, but also to pulsating DC components, which is important for circuits supplying modern household and electronic loads.
The device is mounted on a DIN rail and occupies 4 modular widths. Its installation depth is 70 mm, which should be considered when designing and assembling the switchboard. The enclosure has IP20 protection and is intended for installation inside enclosed electrical cabinets with pollution degree 2. The rated insulation voltage Ui is 500 V, while the rated impulse withstand voltage Uimp is 4 kV. Short-circuit withstand current Icw reaches 6 kA, and the impulse current withstand value is 0.25 kA.
Connection options cover solid conductors from 1 to 25 mm² and stranded conductors from 1 to 16 mm². The unit includes a locking device, and additional accessories can be installed if required by the switchboard configuration. The ambient operating temperature range is from -25 to +40 °C. The enclosure color corresponds to RAL 7005. Power loss is 4.50 W.
Кількість полюсів
4
Ступінь захисту IP
IP20
Ширина в кількості модульних відстаней
4
Струм короткого замикання Icw
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна напруга
400 V
Номінальна ізоляційна напруга Ui
500 V
Номінальний струм витоку
0.03 A
Номінальний струм
25 A
Глибина вбудовування
70 mm
Номер RAL (аналогічний)
7005
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Вибухозахищений
ні
Селективний захист
ні
Короткочасне затримане спрацьовування
ні
Можливе додаткове обладнання
так
Метод монтажу
DIN-рейка
З блокувальним пристроєм
так
Тип напруги
Змінний струм
Тип витоку струму
A
Частота
50 Гц
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
4.50 W
0 reviews
No reviews for this product yet. Be the first!