KAБЛЕКС УКРАЇНА ШВВП 2x1.0 mm² flexible connecting cord
Flexible two-core copper stranded cord with a 1.0 mm² cross-section per core, white sheath, and rated voltage up to 0.38/0.38 kV.
Кількість полюсів
4
Ступінь захисту IP
IP20
Ширина в кількості модульних відстаней
4
Струм короткого замикання Icw
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна напруга
400 V
Номінальна ізоляційна напруга Ui
500 V
Номінальний струм витоку
0.03 A
Code: CDA440D
Hager CDA440D residual current device, 4P, 40 A, 30 mA, Type A, 400 V, DIN-rail mounting, 4 modules, Icw 6 kA, IP20.
2,205.32 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This Hager residual current device is designed to disconnect the circuit when leakage current is detected, helping protect people and electrical installations in residential, commercial, and light industrial environments. The CDA440D model is a 4-pole device intended for AC systems with a rated voltage of 400 V and a frequency of 50 Hz, making it suitable for three-phase circuits with a neutral conductor. Its rated current of 40 A allows it to be used on distribution and group circuits with corresponding load requirements.
The device has a residual operating current of 0.03 A, which means it trips when leakage current reaches 30 mA. This level is commonly used for additional protection of final circuits and equipment where disconnection in the event of insulation faults is required. Type A residual current detection supports circuits where pulsating direct current components may occur, which is important for many modern loads with electronic control.
For installation, the unit is mounted on a DIN rail and occupies 4 modular widths, so it fits standard distribution boards without taking excessive space. The installation depth is 70 mm. The enclosure has an IP20 protection rating, which indicates use inside a panel or enclosed electrical cabinet. The device is also equipped with a locking mechanism and supports additional accessories, while selective protection and short-time delayed operation are not provided.
Electrical withstand characteristics include an Icw short-circuit current rating of 6 kA, impulse current withstand of 0.25 kA, and a rated impulse withstand voltage Uimp of 4 kV. The rated insulation voltage Ui is 500 V. Connection is possible with solid conductors from 1 to 25 mm² and flexible multicore conductors from 1 to 16 mm². The operating temperature range is from -25 to +40 °C, and the pollution degree is 2. Power loss is 6.50 W. These parameters define a device intended for standard low-voltage distribution systems where leakage-current protection and compact panel integration are required.
Кількість полюсів
4
Ступінь захисту IP
IP20
Ширина в кількості модульних відстаней
4
Струм короткого замикання Icw
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна напруга
400 V
Номінальна ізоляційна напруга Ui
500 V
Номінальний струм витоку
0.03 A
Номінальний струм
40 A
Глибина вбудовування
70 mm
Номер RAL (аналогічний)
7005
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Вибухозахищений
ні
Селективний захист
ні
Короткочасне затримане спрацьовування
ні
Можливе додаткове обладнання
так
Метод монтажу
DIN-рейка
З блокувальним пристроєм
так
Тип напруги
Змінний струм
Тип витоку струму
A
Частота
50 Гц
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
6.50 W
0 reviews
No reviews for this product yet. Be the first!