Legrand NILOE STEP flush-mount power socket 16 A, 250 V AC, type F, IP20, aluminium
Flush-mount Legrand power socket with protective contact CEE 7/3 (type F), 16 A, 250 V AC, screw terminals 1.5–2.5 mm², aluminium finish.
Категория продукции
Реле напряжения
Ток, А
16
Способ монтажа
На DIN-рейку
Количество фаз
1 ф. (230 Вольт)
Термозащита
Нет
TrueRMS
Нет
Проф. задержка отключения
Нет
Мощность, ВА
3 500 - 5 000
Code: 4820120220395
Voltage relay ZUBR D16 for single-phase 230 V networks. Rated current 16 A, maximum load 20 A, DIN rail installation. Intended to protect equipment from dangerous voltage deviations.
1,088.00 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
ZUBR D16 is a single-phase voltage relay designed to protect electrical equipment from dangerous voltage deviations in a 230 V network. It continuously monitors the supply voltage and disconnects the load when the voltage goes beyond the set limits. This helps protect household appliances, compressor-based equipment, lighting circuits, and other single-phase consumers from damage caused by overvoltage or undervoltage. The device is also intended to react to a broken neutral conductor, a situation that can lead to hazardous voltage appearing on the phase line.
The relay is rated for a current of 16 A, while the maximum permissible load is 20 A. Its power rating is 3,500 VA, and the product parameters also specify a working range of 3,500–5,000 VA, which should be taken into account when selecting the device for a specific load. Such characteristics make the model suitable for use in distribution boards, especially where the protected line feeds equipment with moderate power demand. For inductive loads, including installations connected through a contactor, this relay can be used as part of a control and protection circuit.
The upper switching threshold can be adjusted from 220 to 280 V, and the lower threshold from 120 to 210 V. After the voltage returns to normal, the load reconnection delay can be set from 3 to 600 seconds in 3-second steps. This functionality is useful for equipment that requires a pause before restart, such as compressors and other motors.
Control is performed using three buttons, and the digital display shows the current voltage and service information, making setup and operating status monitoring more convenient. A green indicator on the housing shows the presence of voltage. The relay is installed on a standard 35 mm DIN rail in a distribution board. The product parameters do not include thermal protection, TrueRMS measurement, or a professional delayed shutdown function.
Категория продукции
Реле напряжения
Ток, А
16
Способ монтажа
На DIN-рейку
Количество фаз
1 ф. (230 Вольт)
Термозащита
Нет
TrueRMS
Нет
Проф. задержка отключения
Нет
Мощность, ВА
3 500 - 5 000
Есть отзывы
Да
Есть вопросы
Да
0 reviews
No reviews for this product yet. Be the first!