ZUBR D40 is a voltage protection relay designed for single-phase 230 V networks where equipment needs protection against overvoltage and undervoltage. When the supply voltage moves outside the preset limits, the device disconnects the load automatically, helping to prevent damage to household and commercial appliances. This makes it suitable for apartments, private houses, offices, and other small facilities that require continuous monitoring of mains quality.
The relay is rated for a nominal current of 40 A, with a maximum permissible current of 50 A. Its load capacity is specified at 8,800 VA, which places the device in the 7,001–10,000 VA power range and allows it to be used with relatively powerful single-phase consumers within the stated limits. Installation is carried out on a standard DIN rail, so the relay can be easily integrated into a distribution board alongside other modular equipment.
The model is equipped with a digital display and three control buttons. These elements make it possible to view the current voltage and adjust the operating thresholds according to the characteristics of the electrical network and connected devices. The user can set the upper and lower voltage limits, as well as the reconnection delay after voltage returns to normal. The adjustable delay range is from 3 to 600 seconds, which is especially useful for refrigerators, air conditioners, heat pumps, and other loads that should not restart too quickly after a power interruption.
The housing is made of non-flammable polycarbonate, which supports safe operation in panel-mounted applications. The design includes power terminals for connection in the current-carrying section of the device. In the internal circuitry, EPCOS capacitors are used. ZUBR D40 is a practical solution for local protection of consumers from abnormal voltage conditions in a 230 V single-phase network.