Motor circuit breaker Schneider Electric TeSys GV2ME16 3P 9-14 A
Автоматичний вимикач TeSys GV, 3 полюси (3P), 14 A/690 В, для 3-фазних двигунів 5,5 кВт при 400 В. Він забезпечує термомагнітний захист із температурн...
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
1990 VA
Номінальна напруга збудження
230-230 V
Номінальний робочий струм
25 A
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
810 VA
Макс. навантаження люмінесцентної лампи
950 VA
Макс. навантаження лампи розжарювання
1900 W
Номінальна робоча напруга
230-230 V
Тип напруги (робоча напруга)
Змінний струм
Code: ESC125
Hager ESC125 is a modular contactor for remote switching of electrical circuits in control panels and lighting systems. It operates on 230–230 V AC, has a rated current of 25 A, 1 normally open contact, 60 mm installation depth, and IP2X protection.
893.36 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager ESC125 is a modular contactor designed for remote switching of electrical circuits in control panels, lighting systems, and other installations where loads need to be switched on and off from a control circuit. It is intended for use in AC networks with a rated operating voltage of 230–230 V and a rated control voltage of 230–230 V, which makes it suitable for standard control installations without additional voltage adaptation. The rated operating current is 25 A, so the device can be used to control typical household and technical loads within its specified electrical limits.
The device has a compact modular format with a width of 1 module and an installation depth of 60 mm, which is important for distribution boards with limited internal space. The protection rating IP2X indicates basic protection against access to hazardous live parts and confirms its use inside enclosed electrical cabinets. The contactor is equipped with 1 normally open contact, allowing it to switch one load circuit.
In terms of application, the ESC125 can be used for lighting control, especially where switching characteristics of different lamp types must be taken into account. The maximum load for incandescent lamps is 1900 W. For fluorescent lighting, the specified values are 950 VA for standard load, 810 VA for parallel compensated load, and 1990 VA for twin-circuit configuration. These parameters are relevant when designing lighting groups and selecting the correct switching device for the connected load type.
The model does not have a day/night function, is not equipped with a manual override slider, and is not designed as a silent type. At the same time, additional accessories can be installed, which allows the configuration to be adapted to the requirements of a specific electrical system. Hager ESC125 is a practical option for modular switchboards where compact dimensions, a 230 V AC control coil, and defined switching characteristics are required.
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
1990 VA
Номінальна напруга збудження
230-230 V
Номінальний робочий струм
25 A
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
810 VA
Макс. навантаження люмінесцентної лампи
950 VA
Макс. навантаження лампи розжарювання
1900 W
Номінальна робоча напруга
230-230 V
Тип напруги (робоча напруга)
Змінний струм
Глибина вбудовування
60 mm
Ступінь захисту (IP)
IP2X
Тип напруги (напруга збудження)
Змінний струм
З функцією день/ніч
ні
Слайдер для ручного вимикача
ні
Без гудіння
ні
Можливе додаткове обладнання
так
Кількість контактів як нормально замкнутих
0
Ширина в кількості модульних відстаней
1
Кількість контактів як нормально розімкнутих
1
0 reviews
No reviews for this product yet. Be the first!