Insulated 1-pole phase busbar for 57 modular devices, 80 A, 415 V
Insulated Hager phase busbar for distributing one phase to up to 57 modular devices in distribution boards. 1P, 80 A, 415 V, fork connection, 16 mm²,...
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
1990 VA
Номінальна напруга збудження
230-230 V
Номінальний робочий струм
25 A
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
810 VA
Макс. навантаження люмінесцентної лампи
950 VA
Макс. навантаження лампи розжарювання
1900 W
Номінальна робоча напруга
230-230 V
Тип напруги (робоча напруга)
Змінний струм
Code: ESC125S
Hager modular contactor for remote switching of lighting and other single-phase loads. Rated current 25 A, 230–230 V AC control and operating voltage, 1 normally open contact, IP2X.
1,292.72 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager ESC125S is a silent modular contactor designed for switching electrical circuits in lighting control systems and other single-phase loads. It is used where remote switching on and off of consumers is required, for example in residential, commercial, and auxiliary electrical installations. With a rated operating current of 25 A, the device is suitable for circuits with moderate load, while the modular format makes it convenient for installation in distribution boards.
The contactor operates with a control coil rated at 230–230 V AC, and its rated operating voltage is also 230–230 V AC. Since both the operating and excitation voltages are specified for alternating current, the model is intended for standard single-phase applications without the need for additional conversion elements. The design includes 1 normally open contact, which is sufficient for controlling one load or one lighting group.
The device supports different load types. The maximum incandescent lamp load is 1900 W. For fluorescent lamps, the specified limits are 950 VA for a standard circuit, 810 VA for a parallel-compensated circuit, and 1990 VA for a twin-circuit arrangement. These values allow the contactor to be used in lighting systems with different connection schemes and load characteristics.
The built-in depth is 60 mm, which should be taken into account when planning the installation space inside the panel. The protection degree IP2X indicates protection against accidental contact with hazardous internal parts, which is important for modular equipment installed in switchboards. The product does not include a manual override slider and does not support additional accessories, so it is intended for straightforward automated switching tasks. ESC125S is a modular solution for centralized control of lighting and other single-phase circuits in electrical distribution systems.
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
1990 VA
Номінальна напруга збудження
230-230 V
Номінальний робочий струм
25 A
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
810 VA
Макс. навантаження люмінесцентної лампи
950 VA
Макс. навантаження лампи розжарювання
1900 W
Номінальна робоча напруга
230-230 V
Тип напруги (робоча напруга)
Змінний струм
Глибина вбудовування
60 mm
Ступінь захисту (IP)
IP2X
Тип напруги (напруга збудження)
Змінний струм
Слайдер для ручного вимикача
ні
Можливе додаткове обладнання
ні
Кількість контактів як нормально замкнутих
0
Кількість контактів як нормально розімкнутих
1
0 reviews
No reviews for this product yet. Be the first!