Motion sensor with switch Schneider Electric New Unica 10 A, anthracite (NU352554)
Датчик руху з вимикачем 10 A New Unica Датчик руху має горизонтальний кут виявлення 160⁰. Легко переключити автоматичний режим увімкнення або вимкненн...
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
1990 VA
Номінальна напруга збудження
230-230 V
Номінальний робочий струм
25 A
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
810 VA
Макс. навантаження люмінесцентної лампи
950 VA
Макс. навантаження лампи розжарювання
1900 W
Номінальна робоча напруга
230-230 V
Тип напруги (робоча напруга)
Змінний струм
Code: ESC227
Hager ESC227 is a modular contactor for switching electrical loads in distribution boards. It has a 25 A rated current, 230 V AC operating and control voltage, 1 normally open and 1 normally closed contact, IP2X protection, 1-module width, and 60 mm installation depth.
992.68 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This modular contactor from Hager is intended for switching electrical circuits in distribution boards, especially in lighting systems and other loads that require frequent switching without manual control on the power side. The device is rated for a 25 A operating current and uses alternating current for both the operating circuit and the control coil. Its rated operating voltage and rated excitation voltage are both 230 V AC, which makes it suitable for common control and supply arrangements in building electrical installations.
The compact modular design takes up 1 module width and has an installation depth of 60 mm, so the contactor can be integrated into a standard distribution board alongside other modular devices. The IP2X protection degree helps prevent access to hazardous live parts under typical panel installation conditions. Additional equipment can be installed, which expands the possible use in control and automation schemes.
The switching configuration includes 1 normally open contact and 1 normally closed contact, allowing the device to be used in control circuits where two different contact states are needed. This makes it practical for lighting automation, auxiliary circuit switching, and other applications that rely on reliable changeover behavior. The unit does not include a day/night function and is not equipped with a manual override slider, so it is designed specifically for automatic operation within an electrical control system.
In terms of load capability, the contactor supports incandescent lamp loads up to 1900 W, fluorescent lamp loads up to 950 VA, parallel-compensated fluorescent loads up to 810 VA, and fluorescent lamps in a two-circuit arrangement up to 1990 VA. These characteristics make it suitable for controlling lighting groups with different operating conditions and electrical requirements.
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
1990 VA
Номінальна напруга збудження
230-230 V
Номінальний робочий струм
25 A
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
810 VA
Макс. навантаження люмінесцентної лампи
950 VA
Макс. навантаження лампи розжарювання
1900 W
Номінальна робоча напруга
230-230 V
Тип напруги (робоча напруга)
Змінний струм
Глибина вбудовування
60 mm
Ступінь захисту (IP)
IP2X
Тип напруги (напруга збудження)
Змінний струм
З функцією день/ніч
ні
Слайдер для ручного вимикача
ні
Без гудіння
ні
Можливе додаткове обладнання
так
Кількість контактів як нормально замкнутих
1
Ширина в кількості модульних відстаней
1
Кількість контактів як нормально розімкнутих
1
0 reviews
No reviews for this product yet. Be the first!