Thermal overload relay Schneider Electric LRE21 12–18A class 10A (LRE21)
Реле LRE — це диференціальне теплове реле перевантаження для використання з запобіжниками або магнітними автоматичними вимикачами GV2 L і GV3 L. Його...
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
3000 VA
Номінальна напруга збудження
230-230 V
Номінальний робочий струм
40 A
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
1300 VA
Макс. навантаження люмінесцентної лампи
1900 VA
Макс. навантаження лампи розжарювання
4000 W
Номінальна робоча напруга
400-400 V
Тип напруги (робоча напруга)
Змінний струм
Code: ESC440
Hager ESC440 is a modular contactor for controlling lighting and other AC loads. Key data: 40 A, 400 V AC, 230 V AC coil, 4 NO contacts, IP2X, 60 mm mounting depth.
3,042.52 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
The Hager ESC440 modular contactor is designed for switching electrical circuits in distribution boards and for controlling lighting, ventilation, and other loads in AC networks. With a rated operating current of 40 A and a rated operational voltage of 400 V AC, it is suitable for use in residential, commercial, and technical electrical installations where reliable load control is required.
The device has a 230 V AC control coil, so it can be actuated by a standard switching signal from a wall switch, timer, controller, or other automation element. The contactor is equipped with 4 normally open contacts, which makes it possible to switch several lines or poles from one unit. This configuration is practical in modular assemblies where compact switching of multiple circuits is needed. The installation width is 3 module spaces, and the mounting depth is 60 mm, which should be taken into account when planning the layout of the distribution board.
In terms of load handling, the contactor is suitable for lighting circuits with incandescent lamps up to 4000 W. For fluorescent lighting, the permissible load is 1900 VA, while in a parallel compensated circuit it is 1300 VA, and in a twin-circuit arrangement it reaches 3000 VA. These values make the device applicable to different lighting systems, where both operating and inrush conditions must be considered.
The IP2X protection rating provides basic protection against accidental contact with live parts when the device is installed inside an enclosed electrical panel. The possibility of adding auxiliary equipment expands the control options within modular automation systems. At the same time, the absence of a day/night function and a manual override slider means the device is intended for standard remote switching rather than manual local control. Hager ESC440 is a modular control component for AC load switching in modern low-voltage installations.
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
3000 VA
Номінальна напруга збудження
230-230 V
Номінальний робочий струм
40 A
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
1300 VA
Макс. навантаження люмінесцентної лампи
1900 VA
Макс. навантаження лампи розжарювання
4000 W
Номінальна робоча напруга
400-400 V
Тип напруги (робоча напруга)
Змінний струм
Глибина вбудовування
60 mm
Ступінь захисту (IP)
IP2X
Тип напруги (напруга збудження)
Змінний струм
З функцією день/ніч
ні
Слайдер для ручного вимикача
ні
Без гудіння
ні
Можливе додаткове обладнання
так
Кількість контактів як нормально замкнутих
0
Ширина в кількості модульних відстаней
3
Кількість контактів як нормально розімкнутих
4
0 reviews
No reviews for this product yet. Be the first!