Contactor Schneider Electric TeSys D 3P 18A 230 V AC 50 Hz (LC1D18P7)
Контактор TeSys D, 3 полюси (3 NO), для керування двигуном до 18 A/690 В AC-3/3e (7,5 кВт при 400 В). Котушка змінного струму 230 В 50/60 Гц, вбудован...
Довжина
1000 mm
Кількість полюсів
1
Can be cut to size
так
Кількість фаз
1
Номінальний безперервний струм Iu
63 A
Ширина модуля
17.8 mm
Ширина в кількості модульних відстаней
57
Придатний для кількості апаратів
57
Code: KDN163B
Hager KDN163B phase busbar for power distribution in modular distribution boards. 1 phase, 1 pole, 63 A, 415 V, 10 mm² cross-section, insulated, 1000 mm length, cuttable to size.
878.28 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager KDN163B is a phase busbar designed for distributing power inside modular distribution boards, where a large number of single-phase devices must be connected in a compact and organized way. It is used as a connecting element between modular devices and helps simplify wiring during the assembly of residential, commercial, and auxiliary electrical panels. The busbar is intended for installations that require stable power distribution across multiple outgoing circuits.
The product is designed for 1 phase and 1 pole, with a rated continuous current Iu of 63 A and a maximum rated operational voltage Ue of 415 V. These characteristics make it suitable for use in modular switchboards within the specified electrical limits. The conductor cross-section is 10 mm², which corresponds to the current-carrying capacity stated by the manufacturer. The electrical connection type is fork, ensuring compatibility with matching modular devices designed for this contact form.
The busbar is insulated, which supports safer handling during installation and operation inside the panel. Its grey color corresponds to standard switchboard component marking and helps maintain a clear internal layout. The product length is 1000 mm, and it can be cut to size, allowing the installer to adapt it to the actual arrangement of equipment in the enclosure. This is especially useful when the distribution board has a limited number of modules or requires a specific busbar length for a particular circuit layout.
In terms of capacity, the busbar has a module width of 17.8 mm, is designed for 57 modular pitches, and is suitable for 57 devices. The nominal impulse withstand voltage is 4.5 kV, indicating resistance to short impulse overvoltages within the distribution system. It is not suitable for devices with an N conductor and is not intended for devices with an auxiliary switch, so it should be selected for standard single-phase modular apparatus without those additional features. Overall, this busbar is a technical solution for structured power distribution in modular panels where one-phase connection, insulation, and adaptation to board dimensions are required.
Колір
Сірий
Довжина
1000 mm
Кількість полюсів
1
Can be cut to size
так
Кількість фаз
1
Номінальний безперервний струм Iu
63 A
Ширина модуля
17.8 mm
Ширина в кількості модульних відстаней
57
Придатний для кількості апаратів
57
Придатний для апаратів з допоміжним вимикачем
ні
Придатний для апаратів з N-провідником
ні
Тип електричного з`єднання
Вилочка
Номінальна напруга удару
4.5 kV
Переріз
10 mm²
Макс. номінальна робоча напруга Uе
415 V
Ізольований
так
0 reviews
No reviews for this product yet. Be the first!