Residual current device Schneider Electric Resi9 2P 40A 300mA AC (R9R54240)
Диференційний вимикач навантаження Resi9. Це 2-полюсний вимикач з номінальним струмом 40 А, класом захисту АC та чутливістю до витоку струму на землю...
Кількість полюсів
3
Ступінь захисту IP
IP20
Мін. номінальна напруга
400 V
Номінальний струм
40 A
Глибина вбудовування
70 mm
Тип напруги
Змінний струм
Функція перемикання
Двонаправлений вимикач
Кількість контактів як перемикальних
3
Code: SFT340
Hager SFT340 is intended for manual transfer of three-phase circuits in 400 V AC networks. It features 3 poles, a rated current of 40 A, IP20 protection, 70 mm installation depth, and a width of 3 modules.
1,889.68 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager SFT340 is a manual load switching device intended for commutation and transfer of electrical circuits in AC networks with a rated voltage of 400 V. It is used in distribution boards, control systems, and electrical installations where a circuit must be switched between two sources or operating modes according to the I-0-II scheme. The version with the common output at the top simplifies wiring and installation in panel assemblies, especially where a predefined conductor layout is required.
This model has 3 poles and 3 changeover contacts, allowing simultaneous switching of three phases. The rated current is 40 A, so the device is suitable for circuits with the corresponding operating load. The bidirectional switching function provides clear transition between positions I, 0, and II, which is important for backup supply, selection of consumer groups, or load transfer between lines. Such operation is especially relevant in three-phase systems where safe manual switching is required without automatic control logic.
The device is designed for AC voltage and operates at a nominal voltage of 400 V. Its short-circuit withstand current Icw is 0.6 kA, and the rated switching current is 0.846 kA. These values should be considered during panel design and when selecting upstream protective devices. The IP20 protection rating indicates installation inside an electrical enclosure, where the device is protected against direct contact with live parts but is not intended for exposed environments with dust or moisture.
The mounting depth is 70 mm, and the width corresponds to 3 modular spacing units, making it suitable for standard modular switchboard arrangements. The device does not have an indicator lamp, so it performs only the switching function without visual status indication. With its three-pole design, 40 A rating, and I-0-II switching logic, this Hager unit is used for manual transfer of loads in three-phase electrical networks in industrial and engineering applications.
Кількість полюсів
3
Ступінь захисту IP
IP20
Мін. номінальна напруга
400 V
Номінальний струм
40 A
Глибина вбудовування
70 mm
Тип напруги
Змінний струм
Функція перемикання
Двонаправлений вимикач
Кількість контактів як перемикальних
3
Ширина в кількості модульних відстаней
3
Кількість контактів як нормально розімкнутих
0
Кількість контактів як нормально замкнутих
0
З сигнальною лампою
ні
Струм короткого замикання Icw
0.6 kA
Номінальний струм відключення
0.846 kA
Номінальна напруга
400 V
0 reviews
No reviews for this product yet. Be the first!