Kablex-Ukraina VVG ng-LS-P power cable, 3-core, 3×2.5 mm²
Three-core fixed-installation power cable with 3×2.5 mm² conductors, 7×0.67 strand structure, third-class flexibility, and reduced smoke emission prop...
Виробник
КАБЛЕКС УКРАЇНА
Тип кабелю
ВBГ п нг-LS
Кількість жил
2
Площа перетину жили
1.5 мм²
Матеріал струмопровідної жили
Мідь
Тип жили
Одножильний
Code: KUc13-3215
Flat power cable VVGng-LS-P for stationary installation in electrical networks up to 1 kV. It has 2 copper solid conductors of 1.5 mm², a flat design, PVC insulation and sheath, and does not support flame spread during grouped installation.
34.59 ₴
In Stock
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This flat power cable is intended for stationary installation in electrical networks of residential, commercial, and administrative facilities where copper conductors, PVC insulation, and reduced smoke emission during fire are required. The product belongs to the VVGng-LS-P cable family, which means it has PVC insulation and sheath, does not contain armor, does not support flame spread during grouped installation, and is characterized by low smoke and gas emission. The flat design with parallel conductor arrangement simplifies laying in cable ducts, trays, and other routes where compact installation is important.
The cable has two current-carrying conductors with a cross-section of 1.5 mm² each. The conductors are made of copper and are solid-core, which makes this version suitable for fixed lines that do not require increased flexibility. The rated AC voltage is 0.66/1 kV, allowing use in networks up to 1 kV inclusive. Such parameters make the cable appropriate for lighting circuits, socket circuits, and other internal electrical loads in building wiring systems.
The VVGng-LS-P construction is focused on fire safety requirements. The ng marking indicates non-flame-propagating behavior, while LS stands for low smoke emission during burning and smoldering. This is especially relevant in grouped cable runs, where it is necessary to limit flame spread and reduce smoke formation in the event of an emergency.
The cable can operate in an ambient temperature range from -50 to +50 °C. Installation is permitted at temperatures not lower than -15 °C. The maximum long-term conductor heating temperature is +70 °C, and in overload mode it reaches +80 °C. During installation, the minimum bending radius is 10 outer diameters, which should be taken into account when routing through turns and junctions. The manufacturer also specifies a relative humidity of up to 98% at temperatures up to +35 °C. The cable is produced by Kabelks-Ukraine and is suitable for stationary indoor wiring where fire performance and compact flat construction are important.
Виробник
КАБЛЕКС УКРАЇНА
Тип кабелю
ВBГ п нг-LS
Кількість жил
2
Площа перетину жили
1.5 мм²
Матеріал струмопровідної жили
Мідь
Тип жили
Одножильний
0 reviews
No reviews for this product yet. Be the first!