ETI SV 225 disconnect switch 2-pole 25A

ETI SV 225 disconnect switch 2-pole 25A
ETI SV 225 disconnect switch 2-pole 25A
Characteristics

Категорія

Вимикач навантаження

Призначення

Вимикач навантаження

Номінальний струм (A)

25A

ETI

Code: 2423222

ETI SV 225 disconnect switch 2-pole 25A

The ETI SV 225 load break switch is used for switching electrical circuits under load. It has 2 poles and a rated current of 25A, and belongs to the ETI SV series.

per pcs.

349.44 ₴

On Order

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

The ETI SV 225 load break switch is designed for switching electrical circuits under load in distribution boards, switchgear assemblies, and other installations where manual control of power lines is required. It is used for operational isolation of a circuit during maintenance, as well as for controlling the supply of electricity in distribution systems. Such equipment is applied in residential, commercial, and industrial networks, provided that the operating conditions match the rated electrical parameters.

This model belongs to the ETI SV series and has a 2-pole design, which allows simultaneous switching of two conductors. The rated current is 25 A, so the device is intended for circuits with a corresponding load level. The two-pole configuration is especially useful in installations where the line must be disconnected on more than one pole in accordance with the wiring scheme and operating requirements.

As a load break switch, this device is not intended to provide automatic protection against overload or short circuit. Its purpose is purely circuit switching, making it an element for manual control and disconnection within a larger electrical system that includes separate protective devices. This distinction is important during switchboard design, where load switching equipment is selected as part of the overall distribution and isolation concept.

ETI SV 225 with article number 2423222 is suitable for systems where clear circuit separation and convenient operation are important. The combination of 2-pole execution and a 25 A rating makes it appropriate for medium-load lines, while the SV series supports equipment selection within a unified product family from the same manufacturer. This load break switch is commonly used in switchboard assemblies for controlled switching of specific sections of an electrical network.

Головна

Категорія

Вимикач навантаження

Призначення

Вимикач навантаження

Номінальний струм (A)

25A

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed

Schneider Electric room thermostat with built-in sensor 8A, white (NU350118)
Schneider Electric room thermostat with built-in sensor 8A, white (NU350118)

Термостат кімнатний, вбудованний датчик 8А білий

Room thermostat Schneider Electric 8A with built-in sensor, anthracite (NU350154)
Room thermostat Schneider Electric 8A with built-in sensor, anthracite (NU350154)

Термостат кімнатний, вбудованний датчик 8А антрацит

Schneider Electric Unica System+ flush-mounted block 2x4 antibacterial (NU171820)
Schneider Electric Unica System+ flush-mounted block 2x4 antibacterial (NU171820)

Блок unica system+ прихована вставка 2х4 антибактеріальний

Flexible 3-core copper stranded ШВВП cable, 2.5 mm², white PVC, up to 380 V
Flexible 3-core copper stranded ШВВП cable, 2.5 mm², white PVC, up to 380 V

Flexible flat ШВВП connecting cord with 3 copper stranded conductors, 2.5 mm² each, white PVC insulation and sheath, for indoor appliance connections...

Flexible 2-core copper stranded connecting cord, white, 0.75 mm², up to 380 V
Flexible 2-core copper stranded connecting cord, white, 0.75 mm², up to 380 V

Flexible flat ШВВП connecting cord with 2 copper stranded conductors, 0.75 mm² each, white PVC insulation and sheath, for voltages up to 380 V.

Legrand 050187 plug, 2-pole with earth, 16 A, straight cable entry, white
Legrand 050187 plug, 2-pole with earth, 16 A, straight cable entry, white

Indoor white Legrand plug with 2K+E configuration, 16 A rating, screw terminals, straight cable entry, and IP20 protection.

Hager CDA440D RCD 4-pole 40 A 30 mA Type A DIN rail 4 modules
Hager CDA440D RCD 4-pole 40 A 30 mA Type A DIN rail 4 modules

4-pole Hager residual current device for 400 V AC systems, rated at 40 A with 30 mA residual operating current, Type A, DIN-rail mounting, IP20, 4 mod...

Schneider Electric TeSys D contactor 3P 9A 24 V AC 50 Hz (LC1D09B7)
Schneider Electric TeSys D contactor 3P 9A 24 V AC 50 Hz (LC1D09B7)

Контактор TeSys D, 3 полюси (3 NO), для керування двигуном до 9A/690V AC-3/3e (4kW при 400V). Котушка змінного струму 24 В 50/60 Гц, вбудовані допоміж...

Schneider Electric Modicon TM3 digital output module 16 outputs 0.5 A transistor TM3DQ16T
Schneider Electric Modicon TM3 digital output module 16 outputs 0.5 A transistor TM3DQ16T

Цей продукт є частиною лінійки Modicon TM3, пропозиції модулів введення/виведення розширення для Modicon M221, M241, M251 і M262. Модуль дискретного в...

Thermal relay Schneider Electric TeSys LRD07 1.6-2.5 A overload protection
Thermal relay Schneider Electric TeSys LRD07 1.6-2.5 A overload protection

Теплове реле перевантаження TeSys LRD, 2,5 A/690 В, діапазон теплового налаштування 1,6-2,5 A, клас спрацьовування 10 A, для захисту 3-фазних двигунів...