Motion sensor with switch Schneider Electric New Unica 10 A, white (NU352518)
Датчик руху з вимикачем 10 A New Unica. Датчик руху має горизонтальний кут виявлення 160⁰. Легко переключити автоматичний режим увімкнення або вимкнен...
Кількість полюсів
2
Номінальна напруга
230 V
Номінальний струм
63 A
Номінальний струм витоку
0.03 A
Номінальна напруга ізоляції Ui
250 V
Номінальна імпульсна напруга
4 kV
Спосіб монтажу
DIN-рейка
Тип по струму витоку
AC
Code: 402026
Protection for AC electrical circuits against leakage currents. 2P, 63 A, 230 V AC, 30 mA, 2 modules, DIN rail, screw terminals, IP20.
1,723.90 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Legrand RX3 differential relay is designed to protect AC electrical circuits against leakage currents and to improve the safety of distribution systems in residential, commercial, and utility installations. The device is rated for 63 A, operates in a 2-pole version, and is intended for 230 V AC networks at 50 Hz. The rated residual current is 30 mA, which makes it suitable for protecting final circuits where rapid disconnection is required in the event of leakage to the enclosure or to earth. The AC-type residual current response means the unit reacts to sinusoidal alternating differential current.
This model is mounted on a DIN rail and occupies 2 modules, which helps save space in the distribution board. Its dimensions are 35.6 × 77.8 × 88.9 mm, and the built-in depth is 44 mm, an important parameter when designing compact switchboards. The housing is grey, with RAL 7035 as the corresponding colour reference. The IP20 protection rating indicates indoor installation inside electrical enclosures, while pollution degree 2 and IK04 impact resistance describe operation under standard internal conditions.
The relay has an insulation rated voltage Ui of 250 V and an impulse withstand voltage of 4 kV. The short-circuit withstand capacity (Icw) is 10 kA, and the surge current withstand rating is 0.25 kA. The device has no selective protection and no time-delay tripping, so it is used as a direct protective element for end circuits. A built-in locking device is provided.
Connection is made using screw terminals, with support for busbar and cable wiring. Permitted conductor cross-sections are 0.75–35 mm² for flexible multi-strand conductors and 0.75–50 mm² for solid conductors. The supply direction can be from the top or from the bottom. The operating temperature range is from -25 to 60 °C, and storage is permitted from -40 to 70 °C. The unit also complies with the 1000 V dielectric strength test, which confirms its suitability for standard modular panel applications where leakage-current protection, compact size, and straightforward installation are required.
Кількість полюсів
2
Номінальна напруга
230 V
Номінальний струм
63 A
Номінальний струм витоку
0.03 A
Номінальна напруга ізоляції Ui
250 V
Номінальна імпульсна напруга
4 kV
Спосіб монтажу
DIN-рейка
Тип по струму витоку
AC
Селективний захист
Немає
З короткочасної затримкою відключення
Немає
Відключаюча здатність при короткому замиканні (Icw)
10 kA
Стійкість до імпульсів струму
0.25 kA
Тип напруги
AC
З пристроєм блокування
Так
Частота
50 Hz
Можлива додаткова комплектація
Немає
Ступінь захисту IP
IP20
Кількість модулів
2
Глибина вбудовування
44 mm
Температура навколишнього середовища при експлуатації з (Min-Max)
-25-60 °C
Поперечний перетин багатодротового (гнучкого) провіду, що підключається (Min-Max)
0.75-35 mm²
Перетин підкюченного однодротяного провода (Min-Max)
0.75-50 mm²
RAL-номер (аналогічний)
7035
Вибухозахищені
Немає
Ударостійкість
IK04
Температура зберігання (Min-Max)
-40-70 °C
Номінальна напруга (Min-Max)
180-250 V
Напрямок подачі електрики
Зверху або знизу
Позначення клем
Немає
Відповідність випробуванню на міцність (1000В)
Так
Спосіб приєднання
Гвинтова клема
Тип підключення
Шина та кабель
З полем для напису
Немає
0 reviews
No reviews for this product yet. Be the first!