Motor circuit breaker Schneider Electric TeSys GV GV2ME14 3P 6-10A
Автоматичний вимикач TeSys GV, 3 полюси (3P), 10A/690V, для 3-фазних двигунів 3-4kW при 400V. Він забезпечує термомагнітний захист із температурним ді...
Кількість полюсів
2
Номінальна напруга
230 V
Номінальний струм
40 A
Номінальний струм витоку
0.03 A
Номінальна напруга ізоляції Ui
250 V
Номінальна імпульсна напруга
4 kV
Спосіб монтажу
DIN-рейка
Тип по струму витоку
A
Code: 402037
Legrand RX3 2-pole differential relay for 230 V AC, rated at 40 A with 30 mA residual current, type A, mounted on a DIN rail.
1,791.88 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Legrand RX3 differential relay is designed to protect electrical circuits against leakage currents and is commonly installed in distribution boards for residential, commercial, and auxiliary premises. Its function is to monitor the presence of dangerous residual current and disconnect the circuit when leakage exceeds the set threshold, helping reduce the risk of electric shock and fire caused by insulation faults. The device is intended for single-phase AC networks with a nominal voltage of 230 V and a frequency of 50 Hz, with an operating voltage range of 180–250 V.
This model has 2 poles and a rated current of 40 A. The residual current rating is 0.03 A, or 30 mA, which makes it suitable for circuits where protection against small leakage currents is required. Type A tripping characteristic means compatibility with circuits where pulsating or impulse-shaped residual currents may occur, which is relevant for many household and office loads. The short-circuit withstand rating Icw is 10 kA, while the surge current withstand is 0.25 kA. The rated insulation voltage Ui is 250 V, and the rated impulse voltage is 4 kV. The unit uses a screw terminal connection and supports both busbar and cable connection, with power feed possible from either the top or the bottom.
The device is mounted on a DIN rail and occupies 2 modules, making it suitable for compact arrangement in standard modular enclosures. Its dimensions are 35.6 × 77.8 × 88.9 mm, with an installation depth of 44 mm. The housing is grey, corresponding to RAL 7035. The protection degree is IP20, and impact resistance is IK04, so the product is intended for indoor use. The operating temperature range is -25 to +60 °C, while the storage temperature range is -40 to +70 °C. The permitted conductor cross-section is 0.75–35 mm² for flexible stranded wire and 0.75–50 mm² for solid wire. The device is equipped with a locking mechanism and has a pollution degree of 2. It is also tested for 1000 V dielectric strength.
Кількість полюсів
2
Номінальна напруга
230 V
Номінальний струм
40 A
Номінальний струм витоку
0.03 A
Номінальна напруга ізоляції Ui
250 V
Номінальна імпульсна напруга
4 kV
Спосіб монтажу
DIN-рейка
Тип по струму витоку
A
Селективний захист
Немає
З короткочасної затримкою відключення
Немає
Відключаюча здатність при короткому замиканні (Icw)
10 kA
Стійкість до імпульсів струму
0.25 kA
Тип напруги
AC
З пристроєм блокування
Так
Частота
50 Hz
Можлива додаткова комплектація
Немає
Ступінь захисту IP
IP20
Кількість модулів
2
Глибина вбудовування
44 mm
Температура навколишнього середовища при експлуатації з (Min-Max)
-25-60 °C
Поперечний перетин багатодротового (гнучкого) провіду, що підключається (Min-Max)
0.75-35 mm²
Перетин підкюченного однодротяного провода (Min-Max)
0.75-50 mm²
RAL-номер (аналогічний)
7035
Вибухозахищені
Немає
Ударостійкість
IK04
Температура зберігання (Min-Max)
-40-70 °C
Номінальна напруга (Min-Max)
180-250 V
Напрямок подачі електрики
Зверху або знизу
Позначення клем
Немає
Відповідність випробуванню на міцність (1000В)
Так
Спосіб приєднання
Гвинтова клема
Тип підключення
Шина та кабель
З полем для напису
Немає
0 reviews
No reviews for this product yet. Be the first!