Legrand PLEXO accessory for insulating screw connections
Legrand PLEXO insulating caps for screw connections. Dimensions 14.8 × 14.8 × 1.8 mm, grey, concealed mounting, operating temperature -10 to 40 °C.
Кількість полюсів
1
Тип напруги
AC
Глибина вбудовування
44 mm
Характеристика спрацьовування
C
Номінальний струм
20 A
Номінальна напруга
230 V
Номінальна напруга ізоляції Ui
500 V
Номінальна імпульсна напруга
4 kV
Code: 404029
Single-pole TX³ miniature circuit breaker from Legrand for protection of single-phase circuits in distribution boards. Rated current 20 A, C curve, 6 kA breaking capacity, busbar or cable connection, DIN-rail installation.
246.26 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This Legrand TX³ circuit breaker is designed to protect electrical circuits against overloads and short-circuit currents in residential and similar low-voltage installations. With a single pole and a rated current of 20 A, it is suitable for individual lighting circuits, socket groups, and other single-phase loads installed in distribution boards. The device operates on AC networks with a rated voltage of 230 V and a frequency range of 50–60 Hz, while the rated operating voltage range of 210–440 V allows use within different network conditions.
The C tripping characteristic makes this breaker appropriate for circuits with moderate inrush currents. This is especially relevant for loads that can produce a short start-up current peak, such as equipment with electric motors. The rated short-circuit breaking capacity is 6 kA according to IEC 60898 at 230 V and also 6 kA according to IEC 60947-2 at 230 V. In addition, the current-limiting class 3 helps reduce the thermal and dynamic impact of fault currents on the installation.
The unit is supplied in a grey enclosure, occupies 1 module, and is intended for DIN-rail mounting with concealed installation. Its dimensions are 17.8 mm in width, 77.8 mm in depth, and 88 mm in height, with an installation depth of 44 mm. Connection is made through screw terminals, and the breaker supports busbar and cable wiring. Power feed can be arranged from either the top or the bottom, which simplifies layout inside the panel. A labeling field is provided, and additional accessories can be installed if required.
Electrical and mechanical parameters include insulation rated voltage Ui of 500 V, impulse withstand voltage of 4 kV, IP20 protection degree, pollution degree 2, and IK02 impact resistance. The breaker does not have a switched neutral conductor. The Legrand TX³ series offers a compact modular solution for circuit protection in distribution boards where one protected pole, standard dimensions, and straightforward integration are required.
Кількість полюсів
1
Тип напруги
AC
Глибина вбудовування
44 mm
Характеристика спрацьовування
C
Номінальний струм
20 A
Номінальна напруга
230 V
Номінальна напруга ізоляції Ui
500 V
Номінальна імпульсна напруга
4 kV
Номінальна відключаюча здатність при короткому замиканні Icu IEC 60898 при 230 В
6 kA
Номінальна відключаюча здатність при коротк. замиканні Icu IEC 60947-2 при 230В
6 kA
Частота (Min-Max)
50-60 Hz
Клас струмообмеження
3
Прихований монтаж
Так
З комутованим нейтральним провідником
Немає
Можлива додаткова комплектація
Так
Кількість модулів
1
Ступінь захисту IP
IP20
Вибухозахищені
Немає
Ударостійкість
IK02
Температура зберігання (Min-Max)
-40-70 °C
Номінальна напруга (Min-Max)
210-440 V
Напрямок подачі електрики
Зверху або знизу
Позначення клем
Немає
Номер кольору Ral
7035
Спосіб приєднання
Гвинтова клема
Тип підключення
Шина та кабель
З полем для напису
Так
Спосіб монтажу
DIN-рейка
0 reviews
No reviews for this product yet. Be the first!