Residual current device Schneider Electric Resi9 2P 63A 100 mA AC (R9R52263)
Диференційний вимикач навантаження Resi9. Це 2-полюсний вимикач з номінальним струмом 63 А, класом захисту АC та чутливістю до витоку струму на землю...
Кількість полюсів
1
Тип напруги
AC
Глибина вбудовування
44 mm
Характеристика спрацьовування
C
Номінальний струм
25 A
Номінальна напруга
230 V
Номінальна напруга ізоляції Ui
500 V
Номінальна імпульсна напруга
4 kV
Code: 404030
Legrand TX³ 1P modular circuit breaker with 25 A rated current, C tripping characteristic, and 6 kA short-circuit breaking capacity. Designed for DIN-rail mounting, it features screw terminals, a label field, concealed installation, IP20 protection, and top or bottom supply connection.
272.70 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Legrand TX³ circuit breaker is intended for protecting electrical circuits against overload and short circuit in residential and small commercial installations. The 1-pole version with a rated current of 25 A is suitable for single-phase lines, including lighting circuits, socket groups, and other loads with moderate current demand. Tripping characteristic C makes this device appropriate for circuits with higher inrush currents, such as equipment with motors or other appliances that create a start-up load.
The breaker operates on AC voltage and is designed for a rated voltage of 230 V, with a permissible rated voltage range of 210–440 V. The rated insulation voltage Ui is 500 V, and the rated impulse voltage is 4 kV. Short-circuit breaking capacity reaches 6 kA according to IEC 60898 at 230 V and also 6 kA according to IEC 60947-2 at 230 V. Current-limiting class 3 and a mains frequency range of 50–60 Hz define its operating parameters within standard low-voltage distribution systems. The pollution degree 2 indicates intended use in typical indoor environments.
This model is designed for DIN-rail mounting and occupies 1 module. Its dimensions are 17.8 mm in width, 77.8 mm in depth, and 88 mm in height, with an installation depth of 44 mm. Concealed installation is supported. The gray housing corresponds to RAL 7035, the enclosure protection rating is IP20, and the impact resistance is IK02. The breaker has 1 protected pole and does not include a switched neutral conductor. Connection is made by screw terminal, with support for both busbar and cable wiring. Power can be supplied from the top or the bottom, which simplifies layout in the distribution board.
An inscription field is provided for circuit identification, and additional accessories can be added if required. Storage is permitted within a temperature range of -40 to 70 °C. Together, these features make the device suitable for compact modular switchboards where space efficiency, clear circuit labeling, and defined protective characteristics are required.
Кількість полюсів
1
Тип напруги
AC
Глибина вбудовування
44 mm
Характеристика спрацьовування
C
Номінальний струм
25 A
Номінальна напруга
230 V
Номінальна напруга ізоляції Ui
500 V
Номінальна імпульсна напруга
4 kV
Номінальна відключаюча здатність при короткому замиканні Icu IEC 60898 при 230 В
6 kA
Номінальна відключаюча здатність при коротк. замиканні Icu IEC 60947-2 при 230В
6 kA
Частота (Min-Max)
50-60 Hz
Клас струмообмеження
3
Прихований монтаж
Так
З комутованим нейтральним провідником
Немає
Можлива додаткова комплектація
Так
Кількість модулів
1
Ступінь захисту IP
IP20
Вибухозахищені
Немає
Ударостійкість
IK02
Температура зберігання (Min-Max)
-40-70 °C
Номінальна напруга (Min-Max)
210-440 V
Напрямок подачі електрики
Зверху або знизу
Позначення клем
Немає
Номер кольору Ral
7035
Спосіб приєднання
Гвинтова клема
Тип підключення
Шина та кабель
З полем для напису
Так
Спосіб монтажу
DIN-рейка
0 reviews
No reviews for this product yet. Be the first!