Hager SBN325 load break switch, 3 poles, 25 A, 400 V AC
3-pole load break switch for manual switching and disconnection of electrical circuits. Rated current 25 A, rated voltage 400 V AC, IP20, 2-module wid...
Номінальна напруга
240 V
Номінальний струм
16 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP2X
Глибина вбудовування
68 mm
Характеристика спрацьовування
B
Code: ADA916D
Hager ADA916D is a two-pole 1+N differential circuit breaker for distribution boards. Rated current 16 A, B trip curve, residual current 0.03 A, type A, breaking capacity 6 kA, width 2 modules.
2,873.00 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager ADA916D is a differential circuit breaker designed to protect single-phase AC electrical circuits against overload, short circuit, and earth leakage. It combines the functions of an automatic overcurrent device and residual current protection, making it suitable for distribution boards in residential, administrative, and commercial installations where both line protection and leakage monitoring are required.
The device is rated for 240 V AC at 50 Hz and a nominal current of 16 A. Trip characteristic B makes it appropriate for circuits with low inrush currents, such as lighting circuits and general-purpose socket groups. The residual current rating of 0.03 A ensures disconnection when dangerous leakage current appears, while type A residual current detection allows operation with both sinusoidal alternating leakage currents and pulsating direct components.
This model has a 1+N two-pole configuration, with one protected pole and simultaneous switching of the neutral conductor. The overall width is 2 module spaces, and the built-in depth is 68 mm, which simplifies installation in standard distribution boards. Connection is provided for solid conductors from 1 to 25 mm² and stranded conductors from 1 to 16 mm². The presence of a locking device supports secure mounting and service work.
In terms of protective performance, the breaker has a short-circuit breaking capacity of 6 kA according to EN 61009-1 and IEC 60947-2, current limiting class 3, impulse withstand voltage of 4 kV, and rated insulation voltage of 500 V. The IP2X protection rating helps limit access to live parts, while pollution degree 2 and overvoltage category 3 correspond to typical conditions in switchboard equipment. The operating temperature range from -25 to +40 °C allows use in a wide range of indoor environments. The instantaneous tripping mode without delay ensures rapid circuit disconnection during fault conditions.
Номінальна напруга
240 V
Номінальний струм
16 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP2X
Глибина вбудовування
68 mm
Характеристика спрацьовування
B
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Кількість полюсів (загалом)
2
Ширина в кількості модульних відстаней
2
Клас обмеження струму
3
Характеристика роз`єднання
Без затримки
Тип витоку струму
A
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
5.20 W
Номінальна відмикальна здатність при короткому замиканні Icn згідно EN 61009-1
6 kA
Номінальна відмикальна здатність при короткому замиканні згідно IEC 60947-2
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна ізоляційна напруга Ui
500 V
Виконання захисту від хибних спрацювань
ні
Одночасне перемикання нульового провідника
так
З блокувальним пристроєм
так
0 reviews
No reviews for this product yet. Be the first!