Victron Energy MK3-USB Interface Adapter (VE.Bus to USB)
The Victron MK3-USB Interface Adapter (VE.Bus to USB) — is an official Victron interface adapter that allows you to connect VE.Bus devices (such as Mu...
Номінальна напруга
240 V
Номінальний струм
40 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP20
Глибина вбудовування
68 mm
Характеристика спрацьовування
C
Code: ADA990D
Hager two-pole differential circuit breaker for protecting lines against overload, short circuit, and residual current. Rated current 40 A, C characteristic, type A, 30 mA residual current, 6 kA breaking capacity, 2-module DIN-rail installation.
3,451.76 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
The Hager ADA990D differential circuit breaker is designed to protect AC electrical circuits against overload, short circuit, and residual current in 240 V, 50 Hz networks. It is used in distribution boards for residential, commercial, and auxiliary installations where combined protection in a single device is required. With a rated current of 40 A, the device is suitable for group circuits with medium load. Trip curve C makes it appropriate for circuits with inrush currents, including loads with electric motors or other equipment that draws a brief higher current at switch-on.
The device uses type A residual current detection, meaning it responds to alternating residual current and pulsating direct residual current. The rated residual operating current of 0.03 A provides personal protection and helps limit the risk of insulation damage. The short-circuit breaking capacity is 6 kA according to both EN 61009-1 and IEC 60947-2, which suits standard low-voltage installations. Current limiting class 3 and instantaneous tripping without delay support fast disconnection of faulted circuits. Simultaneous switching of the neutral conductor improves circuit isolation during operation.
This model is built in a 1+N, two-pole design with 2 total poles and a width of 2 module units, so it fits standard modular distribution boards. The installation depth is 68 mm, which should be considered when planning the enclosure layout. Protection degree IP20 indicates indoor use inside an electrical cabinet. The operating temperature range from -25 to +40 °C allows use in a wide range of environmental conditions. For connection, the permissible conductor cross-section is 1-16 mm² for stranded conductors and 1-25 mm² for solid conductors. Additional electrical data include rated insulation voltage Ui 500 V, impulse withstand voltage Uimp 4 kV, pollution degree 2, overvoltage category 3, and power loss of 11.10 W. The device has no false-tripping protection and no locking device.
Номінальна напруга
240 V
Номінальний струм
40 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP20
Глибина вбудовування
68 mm
Характеристика спрацьовування
C
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Кількість полюсів (загалом)
2
Ширина в кількості модульних відстаней
2
Клас обмеження струму
3
Характеристика роз`єднання
Без затримки
Тип витоку струму
A
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
11.10 W
Номінальна відмикальна здатність при короткому замиканні Icn згідно EN 61009-1
6 kA
Номінальна відмикальна здатність при короткому замиканні згідно IEC 60947-2
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна ізоляційна напруга Ui
500 V
Виконання захисту від хибних спрацювань
ні
Одночасне перемикання нульового провідника
так
З блокувальним пристроєм
ні
0 reviews
No reviews for this product yet. Be the first!