Thermal relay Schneider Electric TeSys LRD07 1.6-2.5 A overload protection
Теплове реле перевантаження TeSys LRD, 2,5 A/690 В, діапазон теплового налаштування 1,6-2,5 A, клас спрацьовування 10 A, для захисту 3-фазних двигунів...
Кількість полюсів
2
Ступінь захисту IP
IP20
Ширина в кількості модульних відстаней
2
Струм короткого замикання Icw
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна напруга
230 V
Номінальна ізоляційна напруга Ui
500 V
Номінальний струм витоку
0.03 A
Code: CDA225D
Hager residual current device for 230 V AC networks. Rated current 25 A, residual current 30 mA, Type A, DIN-rail mounting, 2-module width.
1,743.56 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager CDA225D is a residual current device designed to improve electrical safety in household and commercial distribution boards by disconnecting circuits when leakage current appears. It is suitable for protection of group lines, socket circuits, and individual loads in AC networks with a rated voltage of 230 V and a frequency of 50 Hz. The device has 2 poles and a rated current of 25 A, which allows it to be used in standard single-phase circuits where residual current protection is required.
The rated residual operating current is 30 mA, making this device appropriate for personal protection against electric shock in typical low-voltage installations. Type A sensitivity means it responds to alternating residual current and pulsating direct residual current, which is important when the circuit includes electronic power supplies, household appliances, or other non-linear loads. The short-circuit withstand current Icw is 6 kA, while the impulse withstand current is 0.25 kA. The rated insulation voltage Ui is 500 V, and the rated impulse withstand voltage Uimp is 4 kV.
Installation is carried out on a DIN rail. The unit occupies 2 module widths, and the installation depth is 70 mm. A locking device is provided, and additional accessories can be fitted if required. The enclosure has IP20 protection, intended for installation inside a distribution board. The pollution degree is 2, which corresponds to standard indoor conditions. The operating temperature range is from -25 to 40 °C.
For conductor connection, solid conductors with a cross-section of 1–25 mm² and stranded conductors with a cross-section of 1–16 mm² are supported. The device is not selective, does not have short-time delayed tripping, and is not explosion-proof. The approximate RAL color is 7005. Power loss is 2.32 W.
Кількість полюсів
2
Ступінь захисту IP
IP20
Ширина в кількості модульних відстаней
2
Струм короткого замикання Icw
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна напруга
230 V
Номінальна ізоляційна напруга Ui
500 V
Номінальний струм витоку
0.03 A
Номінальний струм
25 A
Глибина вбудовування
70 mm
Номер RAL (аналогічний)
7005
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Вибухозахищений
ні
Селективний захист
ні
Короткочасне затримане спрацьовування
ні
Можливе додаткове обладнання
так
Метод монтажу
DIN-рейка
З блокувальним пристроєм
так
Тип напруги
Змінний струм
Тип витоку струму
A
Частота
50 Гц
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
2.32 W
0 reviews
No reviews for this product yet. Be the first!