Thermal overload relay Schneider Electric LRD3363 63–80 A
РЕЛЕ ЗАХИСТУ 63-80
Кількість контактів як нормально замкнутих
0
Кількість контактів як нормально розімкнутих
1
Кількість контактів як перемикальних
0
Керуюча напруга 2
110-110 V
Напруга живлення
250-250 V
Макс. струм перемикання (cos ? = 0,6)
16 A
Глибина вбудовування
63 mm
Ширина в кількості модульних відстаней
17.5
Code: EPN510
Hager EPN510 modular impulse relay for controlling lighting and other circuits in distribution boards. It is mounted on a DIN rail, operates from a 250 V AC supply, supports 230 V AC or 110 V DC control voltage, and is rated at 16 A with 1 normally open contact.
700.96 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager EPN510 is a modular impulse relay designed for remote switching of lighting and other electrical circuits where loads need to be turned on and off from multiple control points. It is typically used in distribution boards in residential, commercial, and public buildings, especially in stairwells, corridors, utility areas, and other installations controlled by push buttons or similar pulse devices. The relay functions as a mechanical switch and is intended for installation on a DIN rail, which makes it suitable for standard modular switchboard layouts.
The device has a nominal switching current of 16 A and a maximum switching current of 16 A at cos φ = 0.6. The supply voltage is 250 V AC, while the control voltage options include 230 V AC and 110 V DC. For AC control, the frequency range is 50–60 Hz, and the same frequency range is specified for the control circuit as a technical parameter. This flexibility allows the relay to be integrated into different control schemes depending on the project requirements.
The EPN510 has one normally open contact and supports manual operation, which is useful during commissioning, testing, and maintenance. Its mounting format is compact: 17.5 mm wide in modular pitch and 63 mm deep, so it occupies a single module in the distribution board. The relay is suitable for switching incandescent lamps up to 1800 W, fluorescent lamps up to 800 VA, parallel-compensated fluorescent loads up to 900 VA, and two-circuit fluorescent loads up to 1600 VA. These load values make the device appropriate for controlling various lighting groups and similar electrical consumers in building automation and switching circuits.
Кількість контактів як нормально замкнутих
0
Кількість контактів як нормально розімкнутих
1
Кількість контактів як перемикальних
0
Керуюча напруга 2
110-110 V
Напруга живлення
250-250 V
Макс. струм перемикання (cos ? = 0,6)
16 A
Глибина вбудовування
63 mm
Ширина в кількості модульних відстаней
17.5
Керуюча напруга 1
230-230 V
Придатний для ручного керування
так
Метод монтажу
DIN-рейка
Тип напруги живлення
Змінний струм
Тип керуючої напруги 1
Змінний струм
Тип керуючої напруги 2
Постійний струм
Частота керуючої напруги 1
50-60 Hz
Частота керуючої напруги 2
50-60 Hz
Макс. навантаження люмінесцентної лампи (паралельно компенсована)
900 VA
Макс. навантаження лампи розжарювання
1800 W
Функція
Механічний вимикач
Макс. навантаження люмінесцентної лампи
800 VA
Макс. навантаження люмінесцентної лампи (двоконтурна схема)
1600 VA
Номінальний струм вимикача
16 A
0 reviews
No reviews for this product yet. Be the first!