Catalog HOUSEHOLD AND COMMERCIAL EQUIPMENT Modular protective and switching equipment Impulse relays Impulse relay Hager EPN515 for DIN rail, 16 A, 1 normally closed and 1 normally open contact

Impulse relay Hager EPN515 for DIN rail, 16 A, 1 normally closed and 1 normally open contact

Impulse relay Hager EPN515 for DIN rail, 16 A, 1 normally closed and 1 normally open contact
Impulse relay Hager EPN515 for DIN rail, 16 A, 1 normally closed and 1 normally open contact
Characteristics

Кількість контактів як нормально замкнутих

1

Кількість контактів як нормально розімкнутих

1

Кількість контактів як перемикальних

0

Керуюча напруга 2

110-110 V

Напруга живлення

250-250 V

Макс. струм перемикання (cos ? = 0,6)

16 A

Глибина вбудовування

63 mm

Ширина в кількості модульних відстаней

17.5

Hager

Code: EPN515

Impulse relay Hager EPN515 for DIN rail, 16 A, 1 normally closed and 1 normally open contact

Hager EPN515 impulse relay for DIN rail mounting with a rated current of 16 A, one normally closed contact and one normally open contact. Intended for remote control of lighting circuits, it features manual operation, a width of 17.5 mm, and an installation depth of 63 mm.

per pcs.

818.48 ₴

On Order

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

Hager EPN515 is an impulse relay designed for remote switching of lighting and other electrical circuits in distribution boards. It is used where a load must be controlled from several push-button stations while keeping the circuit logic simple and avoiding the need for a standard latching switch. This makes the device suitable for staircase lighting, corridors, offices, residential buildings, and other installations where switching from multiple points is required.

The relay operates from a 250 V AC supply. Control voltage 1 is 230 V AC with a frequency of 50–60 Hz, while control voltage 2 is 110 V DC with the same frequency range listed in the product data. Such electrical characteristics allow the relay to be integrated into different control schemes. The device has one normally closed contact and one normally open contact, which expands its use in switching and control tasks. The rated switching current and maximum switching current at cos φ = 0.6 are 16 A, and the nominal switching current is also 16 A.

In terms of load capacity, the relay is suitable for incandescent lamps up to 1800 W, fluorescent lamps up to 800 VA, parallel compensated fluorescent lamps up to 900 VA, and two-circuit fluorescent lamp configurations up to 1600 VA. It also includes a mechanical switch function, so manual operation is possible during setup, testing, or servicing.

The device is intended for DIN rail mounting, which ensures easy installation in standard modular enclosures. Its width is 17.5 mm, and the installation depth is 63 mm, both of which are important when planning space inside the cabinet. Hager EPN515 combines compact modular dimensions with defined switching characteristics, making it a practical solution for organized control of single circuits in electrical distribution systems.

Головна

Кількість контактів як нормально замкнутих

1

Кількість контактів як нормально розімкнутих

1

Кількість контактів як перемикальних

0

Керуюча напруга 2

110-110 V

Напруга живлення

250-250 V

Макс. струм перемикання (cos ? = 0,6)

16 A

Глибина вбудовування

63 mm

Ширина в кількості модульних відстаней

17.5

Керуюча напруга 1

230-230 V

Придатний для ручного керування

так

Метод монтажу

DIN-рейка

Тип напруги живлення

Змінний струм

Тип керуючої напруги 1

Змінний струм

Тип керуючої напруги 2

Постійний струм

Частота керуючої напруги 1

50-60 Hz

Частота керуючої напруги 2

50-60 Hz

Макс. навантаження люмінесцентної лампи (паралельно компенсована)

900 VA

Макс. навантаження лампи розжарювання

1800 W

Функція

Механічний вимикач

Макс. навантаження люмінесцентної лампи

800 VA

Макс. навантаження люмінесцентної лампи (двоконтурна схема)

1600 VA

Номінальний струм вимикача

16 A

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed

Insulated 2-pole fork-type phase busbar for modular switchboards
Insulated 2-pole fork-type phase busbar for modular switchboards

Insulated Hager phase busbar with fork-type connection, rated at 63 A, 400 V, 2 poles, and 12 modular pitches. Suitable for up to 6 devices and can be...

Шунт Victron Energy SmartShunt 500A/50mV
Шунт Victron Energy SmartShunt 500A/50mV

 The SmartShunt is an intelligent battery monitor providing detailed usage insights via the VictronConnect app. Compatible with any battery type,...

ETI SV 125 load disconnect switch 1-pole 25A
ETI SV 125 load disconnect switch 1-pole 25A

ETI SV 125 is a load breaker designed for switching electrical circuits and for manual load disconnection. It is used in distribution boards, control...

Mounting block Schneider Electric Unica System+ for surface installation 4x2, white (NU124418)
Mounting block Schneider Electric Unica System+ for surface installation 4x2, white (NU124418)

Блок unica system+ відкрита вставка 4х2 білий

Busbar Schneider Electric Easy9 comb type 63A 1P 12 modules (EZ9XPH112)
Busbar Schneider Electric Easy9 comb type 63A 1P 12 modules (EZ9XPH112)

Гребінчаста шинка Easy9 на 12 модулів. Шинка призначена для 1-фазної мережі. До неї можливо підключити 12 однополюсних пристроїв. Шинка сумісна з авто...

USB socket Schneider Electric New Unica Type A+C, 12 W, aluminium, flush-mounted (NU301830)
USB socket Schneider Electric New Unica Type A+C, 12 W, aluminium, flush-mounted (NU301830)

USB-зарядний пристрій Schneider Electric New Unica NU301830 - це механізм алюмінієвого кольору з 2 клемами. Максимальна вхідна потужність цього USB-за...

Hager CDA425D RCD, 4-pole, 25 A, 30 mA, type A, DIN rail, 4 modules
Hager CDA425D RCD, 4-pole, 25 A, 30 mA, type A, DIN rail, 4 modules

Four-pole Hager residual current device for 400 V AC networks: 25 A, 30 mA, type A, DIN rail mounting, 4-module width.

Victron Energy MK3-USB Interface Adapter (VE.Bus to USB)
Victron Energy MK3-USB Interface Adapter (VE.Bus to USB)

The Victron MK3-USB Interface Adapter (VE.Bus to USB) — is an official Victron interface adapter that allows you to connect VE.Bus devices (such as Mu...

Legrand Valena Life RJ45 network outlet, Category 6, concealed mounting, white RAL 9003
Legrand Valena Life RJ45 network outlet, Category 6, concealed mounting, white RAL 9003

Legrand Valena Life RJ45 outlet for Category 6 UTP network connections, concealed installation, 1 socket, screw mounting, punch-down terminals, IP21,...

Hager SBN325 load break switch, 3 poles, 25 A, 400 V AC
Hager SBN325 load break switch, 3 poles, 25 A, 400 V AC

3-pole load break switch for manual switching and disconnection of electrical circuits. Rated current 25 A, rated voltage 400 V AC, IP20, 2-module wid...