1901022 Авт. вимикач ETIMAT P10 1p C 1A (10kA)
The ETI ETIMAT P10 circuit breaker is designed to protect electrical lines from overloads and short circuits in distribution boards used in residentia...
Тип напруги
Змінний струм
Глибина вбудовування
70 mm
Характеристика спрацьовування
B
Номінальний струм
20 A
Номінальна напруга
400 V
Ступінь захисту IP
IP20
Під`єднуваний переріз багатодротового провідника
1-25 mm²
Клас обмеження струму
3
Code: MBN120
Modular Hager MBN120 circuit breaker, 1P, 20 A, B curve, 6 kA breaking capacity. Designed for built-in installation in distribution boards with IP20 protection.
293.80 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager MBN120 is a single-pole miniature circuit breaker designed to protect AC electrical circuits against overload and short-circuit conditions. With a rated current of 20 A and B tripping characteristic, it is intended for circuits where fast disconnection is required and where high inrush currents are not expected. Such operating behavior makes the device suitable for individual lighting circuits, socket groups, and other loads with similar electrical demands. The breaker is rated for a nominal voltage of 400 V and operates at 50–60 Hz, which corresponds to standard low-voltage installations.
The device provides a rated breaking capacity of 6 kA according to EN 60898 at 230 V, while the Icu value according to IEC 60947-2 is also 6 kA at 230 V. This allows the breaker to be used in distribution boards where typical fault current levels must be interrupted safely. The current-limiting class 3 helps reduce the energy released during a fault, and the insulation parameters are specified by a Ui of 500 V and an impulse withstand voltage Uimp of 4 kV. The overvoltage category 3 and pollution degree 2 define the environmental and installation conditions for operation.
MBN120 is a modular device with a width of 1 module and is intended for built-in mounting on a DIN rail inside a distribution board. The installation depth is 70 mm, and the IP20 protection rating indicates use within enclosed electrical equipment. The breaker supports connection of solid conductors with a cross-section from 1 to 35 mm² and stranded conductors from 1 to 25 mm², which gives flexibility during wiring. The permissible operating temperature range is from -25 to +70 °C, making the device applicable in a wide range of indoor electrical installations.
The breaker does not switch the neutral conductor simultaneously, is not explosion-proof, and does not support additional accessories. Power dissipation is 2.79 W.
Тип напруги
Змінний струм
Глибина вбудовування
70 mm
Характеристика спрацьовування
B
Номінальний струм
20 A
Номінальна напруга
400 V
Ступінь захисту IP
IP20
Під`єднуваний переріз багатодротового провідника
1-25 mm²
Клас обмеження струму
3
Кількість полюсів (загалом)
1
Ширина в кількості модульних відстаней
1
Вибухозахищений
ні
Одночасне перемикання нульового провідника
ні
Можливе додаткове обладнання
ні
Вбудований монтаж
так
Номінальна відмикальна здатність Icn згідно EN 60898 при 230 В
6 kA
Номінальна ізоляційна напруга Ui
500 V
Номінальна відмикальна здатність Icu згідно IEC 60947-2 при 230 В
6 kA
Power loss
2.79 W
Номінальна напруга витримування удару Uimp
4 kV
Під`єднуваний переріз твердого провідника
1-35 mm²
Температура навколишнього середовища під час роботи
-25-70 °C
Частота
50-60 Hz
0 reviews
No reviews for this product yet. Be the first!