1901022 Авт. вимикач ETIMAT P10 1p C 1A (10kA)

The ETI ETIMAT P10 circuit breaker is designed to protect electrical lines from overloads and short circuits in distribution boards used in residential, commercial, and small industrial installations. It is intended for single-circuit protection where a compact modular device is needed for a branch with low operating current. With one pole, this model is used for one-line protection of the phase conductor in AC systems. The device is rated at 1 A and features a C tripping characteristic. This makes it suitable for circuits where short-term inrush currents may occur, for example when switching on certain electrical loads. The 10 kA breaking capacity allows the circuit breaker to be used in networks with elevated short-circuit current levels, while the 240 V AC rated voltage and AC voltage type define operation in alternating-current circuits at 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which is important for resistance to temporary overvoltage conditions. The breaker complies with EN/IEC 60898, the standard governing circuit breakers for household and similar installations. This simplifies selection for typical panel assemblies and ensures compatibility with widely used electrical wiring schemes. The permitted conductor cross-section range is 1 to 25 mm², so the device can be connected with wires of different sizes within the specified limits. ETIMAT P10 is a practical choice for protecting control circuits, signaling lines, automation circuits, and other low-current branches where accurate protection and stable operation in AC networks are required. Its technical parameters make it suitable for use in modular switchboards where reliable disconnection under overload or short-circuit conditions is essential.