Legrand TX³ 404029 1-pole MCB, 20A, C curve, 6kA
Single-pole Legrand TX³ circuit breaker for AC distribution boards. Rated current 20 A, C tripping curve, 6 kA breaking capacity, DIN-rail mounting, s...
Кількість полюсів
1
Тип напруги
AC
Глибина вбудовування
44 mm
Характеристика спрацьовування
C
Номінальний струм
16 A
Номінальна напруга
230 V
Номінальна напруга ізоляції Ui
500 V
Номінальна імпульсна напруга
4 kV
Code: 404028
Legrand TX³ single-pole circuit breaker, 16 A, C characteristic, 6 kA short-circuit breaking capacity, 230 V AC, 1 module, DIN-rail mounting, IP20, hidden installation, screw terminals, grey RAL 7035.
230.77 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This single-pole circuit breaker from Legrand’s TX³ series is designed to protect low-voltage electrical circuits against overloads and short circuits in residential and similar installations. With a rated current of 16 A, it is suitable for individual lighting circuits and socket circuits with moderate load. The C tripping characteristic makes it appropriate for circuits with higher inrush currents, where stable operation is needed without unnecessary disconnection during start-up of connected equipment.
The device is rated for 230 V AC, with a permissible rated voltage range of 210–440 V. Its insulation voltage Ui is 500 V, and the rated impulse withstand voltage is 4 kV. The short-circuit breaking capacity is 6 kA according to both IEC 60898 and IEC 60947-2, which makes it suitable for distribution boards where fault current limitation is an important safety requirement. The current-limiting class is 3, helping to reduce the energy released during fault conditions.
Mechanically, the breaker is intended for DIN-rail mounting and occupies 1 module. Hidden installation is supported, and the compact dimensions of 17.8 × 77.8 × 88 mm, together with a built-in depth of 44 mm, simplify installation in compact distribution boards. Connection is made via screw terminals, with support for both busbar and cable wiring. Power can be supplied from either the top or the bottom, which provides flexibility during panel assembly. A label field is included for circuit identification.
The housing is grey, RAL 7035. The protection degree is IP20, the pollution degree is 2, and the impact resistance is IK02. The breaker does not have a switched neutral pole. It can be complemented with additional accessories. Operating frequency is 50–60 Hz, and the storage temperature range is from -40 to +70 °C. This device is a practical solution for protecting separate final circuits in apartments, houses, and other low-voltage distribution systems.
Кількість полюсів
1
Тип напруги
AC
Глибина вбудовування
44 mm
Характеристика спрацьовування
C
Номінальний струм
16 A
Номінальна напруга
230 V
Номінальна напруга ізоляції Ui
500 V
Номінальна імпульсна напруга
4 kV
Номінальна відключаюча здатність при короткому замиканні Icu IEC 60898 при 230 В
6 kA
Номінальна відключаюча здатність при коротк. замиканні Icu IEC 60947-2 при 230В
6 kA
Частота (Min-Max)
50-60 Hz
Клас струмообмеження
3
Прихований монтаж
Так
З комутованим нейтральним провідником
Немає
Можлива додаткова комплектація
Так
Кількість модулів
1
Ступінь захисту IP
IP20
Вибухозахищені
Немає
Ударостійкість
IK02
Температура зберігання (Min-Max)
-40-70 °C
Номінальна напруга (Min-Max)
210-440 V
Напрямок подачі електрики
Зверху або знизу
Позначення клем
Немає
Номер кольору Ral
7035
Спосіб приєднання
Гвинтова клема
Тип підключення
Шина та кабель
З полем для напису
Так
Спосіб монтажу
DIN-рейка
0 reviews
No reviews for this product yet. Be the first!