1901016 Авт. вимикач ETIMAT P10 1p B 63A (10kA)

The ETI ETIMAT P10 circuit breaker is designed to protect AC electrical circuits against overloads and short circuits. It is used in distribution boards for residential, administrative, and small commercial installations, where reliable disconnection of an individual line is required in the event of an abnormal operating condition. The single-pole design makes the device suitable for protecting corresponding single-phase circuits. This model is rated for a nominal current of 63 A, which allows it to be used in circuits with higher load demand. The B tripping characteristic means the breaker responds to relatively small overcurrent multiples, so it is intended for networks without significant inrush currents. The breaking capacity of 10 kA enables the device to interrupt short-circuit currents at a level consistent with the requirements of most modern distribution systems. The breaker operates in AC networks with a rated voltage of 240 V and a frequency of 50/60 Hz. The rated impulse withstand voltage Uimp is 6 kV, which indicates resistance to transient overvoltage events in the supply network. Terminal compatibility covers conductor cross-sections from 1 to 25 mm², providing flexibility for common electrical wiring applications and standard panel connections. Manufactured in accordance with EN/IEC 60898, this protective device meets the requirements for household and similar installations. It is suitable for use in electrical switchboards where standardized characteristics, defined protection behavior, and compatibility with typical modular equipment are important. The ETIMAT P10 series is intended for installation in systems where circuit protection must be clearly defined and technically matched to the connected load.