Installation wire PВ-1 ng-LS 2.5

Installation wire PВ-1 ng-LS 2.5
Installation wire PВ-1 ng-LS 2.5
Characteristics
Каблекс-Україна

Code: KUc51-312.5

Installation wire PВ-1 ng-LS 2.5

PВ-1 ng-LS 2.5 wire is used for stationary internal wiring in switchboards, junction boxes, and other electrical equipment. The 2.5 mm² cross-section and ng-LS execution make it suitable for fixed electrical connections with reduced smoke and gas emission.

per m.

26.26 ₴

In Stock

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

The PВ-1 ng-LS 2.5 wire from the brand Kabelks-Ukraine is intended for fixed installation of electrical circuits in switchboards, junction boxes, switchgear assemblies, and other indoor electrical systems. It is used for internal wiring and connection of electrical equipment where a mounting wire with stable electrical characteristics is required. The ng-LS designation indicates reduced smoke and gas emission, which is especially important in enclosed spaces and in installations where fire safety and evacuation conditions are given special attention.

The nominal conductor cross-section is 2.5 mm². This parameter determines the wire’s suitability for circuits that require this conductor size and makes it applicable in typical installation tasks inside distribution boards, control panels, and equipment compartments. PВ-1 belongs to the category of installation wire designed for stationary connections, so it is used for fixed wiring rather than for flexible or moving connections. Such an application format is practical when assembling internal wiring of electrical circuits in residential, commercial, and technical facilities.

The ng-LS execution is important for projects where it is necessary to limit flame spread and reduce smoke formation in the event of emergency heating or ignition. For this reason, the wire is appropriate for use in indoor electrical mounting systems, especially in places with increased safety requirements. It is suitable for internal connections of power circuits, control circuits, and equipment interconnections inside electrical assemblies.

When selecting this product, it is important to consider that it is intended specifically for stationary installation work in electrical systems and for use with a 2.5 mm² conductor cross-section. The product is a standard solution for internal electrical wiring where technical compliance, clear marking, and fire-related performance characteristics are required.

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed

Schneider Electric Modicon TM3 digital output module 16 outputs 0.5 A transistor TM3DQ16T
Schneider Electric Modicon TM3 digital output module 16 outputs 0.5 A transistor TM3DQ16T

Цей продукт є частиною лінійки Modicon TM3, пропозиції модулів введення/виведення розширення для Modicon M221, M241, M251 і M262. Модуль дискретного в...

Thermal relay Schneider Electric TeSys LRD07 1.6-2.5 A overload protection
Thermal relay Schneider Electric TeSys LRD07 1.6-2.5 A overload protection

Теплове реле перевантаження TeSys LRD, 2,5 A/690 В, діапазон теплового налаштування 1,6-2,5 A, клас спрацьовування 10 A, для захисту 3-фазних двигунів...

PV-3 ng-LS 10.0 Installation Wire
PV-3 ng-LS 10.0 Installation Wire

Single-core stranded copper installation wire PВ-3 ng-LS, 10.0 mm², for electrical installations, panels, and cable structures. Flame-retardant for gr...

Legrand Elium angled plug 2-pole with grounding contact, 16 A, 250 V, IP20, screw terminal
Legrand Elium angled plug 2-pole with grounding contact, 16 A, 250 V, IP20, screw terminal

Legrand 2-pole plug with grounding contact, rated 16 A / 250 V AC, white thermoplastic body, angled connection, screw terminal, IP20.

Room thermostat Schneider Electric 8A with built-in sensor, aluminium (NU350130)
Room thermostat Schneider Electric 8A with built-in sensor, aluminium (NU350130)

Термостат кімнатний, вбудованний датчик 8А алюміній

Hager CDA240D RCD, 2-pole, 40 A, 30 mA, Type A, DIN-rail mounted
Hager CDA240D RCD, 2-pole, 40 A, 30 mA, Type A, DIN-rail mounted

Two-pole Hager residual current device for 230 V AC networks, rated 40 A, 30 mA, Type A, DIN-rail mounting.

Flexible flat connecting cord ШВВП 3x1.5 mm² from KABLEX UKRAINE with 3 stranded copper conductors, white sheath, rated up to 380 V
Flexible flat connecting cord ШВВП 3x1.5 mm² from KABLEX UKRAINE with 3 stranded copper conductors, white sheath, rated up to 380 V

Flexible flat ШВВП connecting cord with 3 stranded copper conductors, 1.5 mm² each, white PVC sheath, rated up to 380 V.

Load break switch Hager SBN340, 3-pole, 40 A/400 V
Load break switch Hager SBN340, 3-pole, 40 A/400 V

Three-pole load break switch for 400 V AC circuits, rated at 40 A, with IP20 protection, modular width of 3 pitches, and 68 mm installation depth.

Load Break Switch Hager SBN363 3-Pole 63 A 400 V IP20
Load Break Switch Hager SBN363 3-Pole 63 A 400 V IP20

Three-pole load break switch for manual switching of AC circuits in distribution boards. Rated for 63 A, 400 V, with IP20 protection, 3 module widths,...

Programmable relay Schneider Electric Zelio Logic SR3B261FU, 26 I/O, 100–240 V AC, display, clock
Programmable relay Schneider Electric Zelio Logic SR3B261FU, 26 I/O, 100–240 V AC, display, clock

Це компактне інтелектуальне реле/програмований контролер Zelio Logic SR3 використовує напругу живлення 100-240 В змінного струму. Він має 26 входів/ви...