ETI SV 180 load switch 1-pole 80A

ETI SV 180 load switch 1-pole 80A
ETI SV 180 load switch 1-pole 80A
Characteristics

Категорія

Вимикач навантаження

Призначення

Вимикач навантаження

Номінальний струм (A)

80A

ETI

Code: 2423115

ETI SV 180 load switch 1-pole 80A

The SV 180 load break switch is designed for switching electrical circuits under load. It has 1 pole and a rated current of 80A, and belongs to the ETI SV 180 series.

per pcs.

315.99 ₴

On Order

Quick order
Delivery

Delivery across Ukraine within 5 days from the purchase date.

Payment

Pay for orders via Liqpay and plata by mono services.

Guarantee

100% certified products. Service and support.

About product

This ETI SV 180 load break switch is intended for switching electrical circuits under load in distribution boards and other electrical installations. It is used where a line must be manually connected or disconnected without providing protective functions, making it suitable for circuit isolation during maintenance, local shutdown of equipment, or operational switching of power circuits. The device is applicable in industrial, commercial, and technical power supply systems where clear and reliable circuit disconnection is required.

The model has 1 pole, so it is designed for single-phase or single-conductor switching configurations according to the electrical project. The rated current is 80A, which defines the load level for which the switch is intended. This parameter is important when selecting equipment for main or group disconnection, as the device must correspond to the working current of the line it controls.

As a load break switch, the unit functions as a mechanical switching device for separating an electrical circuit from the power source. Unlike protective modular devices, it does not trip on overload or short circuit; its purpose is manual switching and isolation. This makes it a practical element for switchgear assemblies, where power must be disconnected from individual sections of the network or from equipment that requires periodic shutdown.

The SV 180 series belongs to ETI’s product range, which supports consistent selection of components within one line of equipment. In project planning and installation, the key point is to match the switch to its intended operating role: it is used for control and disconnection, not for circuit protection. With a 1-pole construction and 80A current rating, this device is suitable for applications requiring straightforward control of a single power line in distribution systems.

Головна

Категорія

Вимикач навантаження

Призначення

Вимикач навантаження

Номінальний струм (A)

80A

-

0 reviews

No reviews for this product yet. Be the first!

Recently Viewed

Legrand 050187 plug, 2-pole with earth, 16 A, straight cable entry, white
Legrand 050187 plug, 2-pole with earth, 16 A, straight cable entry, white

Indoor white Legrand plug with 2K+E configuration, 16 A rating, screw terminals, straight cable entry, and IP20 protection.

Hager CDA440D RCD 4-pole 40 A 30 mA Type A DIN rail 4 modules
Hager CDA440D RCD 4-pole 40 A 30 mA Type A DIN rail 4 modules

4-pole Hager residual current device for 400 V AC systems, rated at 40 A with 30 mA residual operating current, Type A, DIN-rail mounting, IP20, 4 mod...

Schneider Electric TeSys D contactor 3P 9A 24 V AC 50 Hz (LC1D09B7)
Schneider Electric TeSys D contactor 3P 9A 24 V AC 50 Hz (LC1D09B7)

Контактор TeSys D, 3 полюси (3 NO), для керування двигуном до 9A/690V AC-3/3e (4kW при 400V). Котушка змінного струму 24 В 50/60 Гц, вбудовані допоміж...

Schneider Electric Modicon TM3 digital output module 16 outputs 0.5 A transistor TM3DQ16T
Schneider Electric Modicon TM3 digital output module 16 outputs 0.5 A transistor TM3DQ16T

Цей продукт є частиною лінійки Modicon TM3, пропозиції модулів введення/виведення розширення для Modicon M221, M241, M251 і M262. Модуль дискретного в...

Thermal relay Schneider Electric TeSys LRD07 1.6-2.5 A overload protection
Thermal relay Schneider Electric TeSys LRD07 1.6-2.5 A overload protection

Теплове реле перевантаження TeSys LRD, 2,5 A/690 В, діапазон теплового налаштування 1,6-2,5 A, клас спрацьовування 10 A, для захисту 3-фазних двигунів...

PV-3 ng-LS 10.0 Installation Wire
PV-3 ng-LS 10.0 Installation Wire

Single-core stranded copper installation wire PВ-3 ng-LS, 10.0 mm², for electrical installations, panels, and cable structures. Flame-retardant for gr...

Legrand Elium angled plug 2-pole with grounding contact, 16 A, 250 V, IP20, screw terminal
Legrand Elium angled plug 2-pole with grounding contact, 16 A, 250 V, IP20, screw terminal

Legrand 2-pole plug with grounding contact, rated 16 A / 250 V AC, white thermoplastic body, angled connection, screw terminal, IP20.

Room thermostat Schneider Electric 8A with built-in sensor, aluminium (NU350130)
Room thermostat Schneider Electric 8A with built-in sensor, aluminium (NU350130)

Термостат кімнатний, вбудованний датчик 8А алюміній

Hager CDA240D RCD, 2-pole, 40 A, 30 mA, Type A, DIN-rail mounted
Hager CDA240D RCD, 2-pole, 40 A, 30 mA, Type A, DIN-rail mounted

Two-pole Hager residual current device for 230 V AC networks, rated 40 A, 30 mA, Type A, DIN-rail mounting.

Flexible flat connecting cord ШВВП 3x1.5 mm² from KABLEX UKRAINE with 3 stranded copper conductors, white sheath, rated up to 380 V
Flexible flat connecting cord ШВВП 3x1.5 mm² from KABLEX UKRAINE with 3 stranded copper conductors, white sheath, rated up to 380 V

Flexible flat ШВВП connecting cord with 3 stranded copper conductors, 1.5 mm² each, white PVC sheath, rated up to 380 V.