Room thermostat Schneider Electric 8A with built-in sensor, aluminium (NU350130)
Термостат кімнатний, вбудованний датчик 8А алюміній
Номінальна напруга
230 V
Номінальний струм
10 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP2X
Глибина вбудовування
68 mm
Характеристика спрацьовування
C
Code: ADA960D
Differential automatic circuit breaker for protection of single-phase 230 V circuits against overload, short circuit, and leakage current. Parameters: 1+N, 2 poles, 10 A, C curve, 30 mA, type A, 6 kA, IP2X, 2 modules.
2,945.80 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager ADA960D is a differential automatic circuit breaker designed for protection of single-phase AC circuits against overload, short circuit, and residual current. It is intended for installation in distribution boards in residential, commercial, and auxiliary premises where both overcurrent protection and fault-current protection are required in one device. The 1+N configuration with 2 poles in total and 1 protected pole matches standard phase and neutral wiring in 230 V, 50 Hz systems.
The device is rated for 10 A and uses C tripping characteristic, which makes it suitable for circuits with moderate inrush current. The residual current rating is 30 mA, and the A-type residual-current detection allows operation with alternating and pulsating direct residual currents. This is an important feature for protecting final circuits supplying loads with electronic components. The breaker has a short-circuit breaking capacity of 6 kA according to both EN 61009-1 and IEC 60947-2, so it is suitable for networks where this interruption level is required. Current limitation class 3, instantaneous disconnection without time delay, and rated impulse withstand voltage of 4 kV support fast fault clearing.
Additional electrical parameters include rated insulation voltage Ui 500 V, pollution degree 2, and overvoltage category 3. The device has IP2X protection, which limits access to hazardous live parts inside the enclosure. The operating temperature range from -25 to +40 °C covers standard indoor installation conditions. Mechanical and installation characteristics are also clearly defined: the unit occupies 2 modular widths, has an installation depth of 68 mm, and supports solid conductors from 1 to 25 mm² as well as stranded conductors from 1 to 16 mm².
The neutral conductor is switched simultaneously, and the device is equipped with a locking mechanism. Power loss is 3.40 W, and the short-circuit current withstand value is 0.25 kA. Altogether, these parameters make the breaker suitable for compact protective assembly in low-voltage distribution systems where combined overload and residual-current protection is needed.
Номінальна напруга
230 V
Номінальний струм
10 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP2X
Глибина вбудовування
68 mm
Характеристика спрацьовування
C
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Кількість полюсів (загалом)
2
Ширина в кількості модульних відстаней
2
Клас обмеження струму
3
Характеристика роз`єднання
Без затримки
Тип витоку струму
A
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
3.40 W
Номінальна відмикальна здатність при короткому замиканні Icn згідно EN 61009-1
6 kA
Номінальна відмикальна здатність при короткому замиканні згідно IEC 60947-2
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна ізоляційна напруга Ui
500 V
Виконання захисту від хибних спрацювань
ні
Одночасне перемикання нульового провідника
так
З блокувальним пристроєм
так
0 reviews
No reviews for this product yet. Be the first!