Hager ADA990D RCBO 1+N 40A C curve 30 mA type A 6 kA
Two-pole Hager differential circuit breaker for overcurrent, short-circuit, and residual-current protection in 240 V AC distribution boards. Rated 40...
Номінальна напруга
230 V
Номінальний струм
16 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP2X
Глибина вбудовування
68 mm
Характеристика спрацьовування
C
Code: ADA966D
Hager ADA966D is a 2-module residual current circuit breaker for 230 V, 50 Hz single-phase AC circuits. It features C tripping characteristic, type A leakage detection, 16 A rated current, and 0.03 A residual current protection.
2,945.80 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
This Hager differential breaker is designed to protect single-phase AC circuits against overload, short circuit, and leakage currents in 230 V, 50 Hz installations. It combines the functions of an automatic protective device and residual current protection, making it suitable for distribution boards in residential, commercial, and household applications where compact line protection is required for lighting circuits, socket outlets, and other single-phase loads.
The device is rated at 16 A and uses C tripping characteristic, which makes it appropriate for circuits with moderate inrush currents. The residual current rating is 0.03 A, while the leakage type A allows detection of alternating and pulsating direct residual currents. The short-circuit breaking capacity is 6 kA according to both EN 61009-1 and IEC 60947-2, which supports fault interruption under high current conditions. Current limiting class 3 and instantaneous disconnection characteristic further define its protective behaviour in everyday electrical installations.
The unit is made for DIN-rail mounting and occupies 2 modular widths. It has 2 poles in total, with 1 protected pole, and the neutral conductor is switched simultaneously. A locking device is included, which is useful during installation and servicing. The ingress protection rating is IP2X, providing basic protection against accidental contact with live parts. The built-in depth is 68 mm, so enclosure space can be planned accordingly.
Electrical parameters include an impulse withstand voltage Uimp of 4 kV, insulation voltage Ui of 500 V, pollution degree 2, and overvoltage category 3. The permitted conductor cross-section is 1–25 mm² for solid conductors and 1–16 mm² for stranded conductors. The operating temperature range is from -25 to +40 °C. Power loss is 5.20 W, and false-tripping protection is not provided. These characteristics make the model a practical solution for protected distribution of single-phase loads where residual current sensitivity and short-circuit protection are both required.
Номінальна напруга
230 V
Номінальний струм
16 A
Номінальний струм витоку
0.03 A
Тип напруги
Змінний струм
Частота
50 Гц
Ступінь захисту IP
IP2X
Глибина вбудовування
68 mm
Характеристика спрацьовування
C
Під`єднуваний переріз багатодротового провідника
1-16 mm²
Кількість полюсів (загалом)
2
Ширина в кількості модульних відстаней
2
Клас обмеження струму
3
Характеристика роз`єднання
Без затримки
Тип витоку струму
A
Номінальна напруга витримування удару Uimp
4 kV
Температура навколишнього середовища під час роботи
-25-40 °C
Під`єднуваний переріз твердого провідника
1-25 mm²
Power loss
5.20 W
Номінальна відмикальна здатність при короткому замиканні Icn згідно EN 61009-1
6 kA
Номінальна відмикальна здатність при короткому замиканні згідно IEC 60947-2
6 kA
Струмова витривалість до ударного струму
0.25 kA
Номінальна ізоляційна напруга Ui
500 V
Виконання захисту від хибних спрацювань
ні
Одночасне перемикання нульового провідника
так
З блокувальним пристроєм
так
0 reviews
No reviews for this product yet. Be the first!