PV-3 ng-LS 10.0 Installation Wire
Single-core stranded copper installation wire PВ-3 ng-LS, 10.0 mm², for electrical installations, panels, and cable structures. Flame-retardant for gr...
Довжина
1000 mm
Кількість полюсів
2
Can be cut to size
так
Кількість фаз
2
Номінальний безперервний струм Iu
63 A
Ширина модуля
17.8 mm
Ширина в кількості модульних відстаней
56
Придатний для кількості апаратів
28
Code: KDN263B
Hager KDN263B phase busbar for modular devices in distribution boards. 2 poles, 2 phases, 63 A, 400 V, 10 mm² cross-section, fork-type connection, insulated, can be cut to size.
1,460.68 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
Hager KDN263B is a phase busbar intended for orderly and safe connection of modular devices in distribution boards. It is used to distribute supply between two-pole circuits, reducing the need for separate jumpers and helping keep the wiring layout compact and clear inside the panel. Such a component is especially useful in boards where several devices must be fed from a common source while maintaining consistent electrical contact.
The busbar is designed for 2 poles and 2 phases, with a nominal continuous current Iu of 63 A. Its maximum rated operational voltage Ue is 400 V, which makes it suitable for standard low-voltage installations. The impulse withstand voltage is 4.5 kV, indicating the level of resistance to transient overvoltages. The conductive section has a cross-section of 10 mm², matching the stated current-carrying parameters.
This model uses a fork-type electrical connection, so it is compatible with devices designed for that terminal form. It is suitable for 28 devices and occupies 56 modular pitches, with a module width of 17.8 mm. The overall length is 1000 mm, and the bar can be cut to size, which makes it easier to adapt the product to the required board layout and the available installation space.
The busbar is insulated, which is important for safe use in switchgear assemblies and for reducing the risk of accidental contact with live parts. The gray color helps visually distinguish the element among other components inside the distribution board. It is also suitable for devices with an N conductor, while it is not intended for devices with an auxiliary switch. In practice, this makes the product a practical solution for power distribution in modular boards where compatibility, installation accuracy, and organized wiring are essential.
Колір
Сірий
Довжина
1000 mm
Кількість полюсів
2
Can be cut to size
так
Кількість фаз
2
Номінальний безперервний струм Iu
63 A
Ширина модуля
17.8 mm
Ширина в кількості модульних відстаней
56
Придатний для кількості апаратів
28
Придатний для апаратів з допоміжним вимикачем
ні
Придатний для апаратів з N-провідником
так
Тип електричного з`єднання
Вилочка
Номінальна напруга удару
4.5 kV
Переріз
10 mm²
Макс. номінальна робоча напруга Uе
400 V
Ізольований
так
0 reviews
No reviews for this product yet. Be the first!