Hager EUD100 voltage and phase relay monitor for 1P+N and 3P+N AC networks
Compact voltage and phase monitoring relay for 230–400 V AC systems, with one changeover contact, adjustable switching delay up to 600 s, and screw te...
Категория продукции
Реле напряжения
Ток, А
50
Способ монтажа
На DIN-рейку
Количество фаз
1 ф. (230 Вольт)
Термозащита
Нет
TrueRMS
Нет
Проф. задержка отключения
Нет
Мощность, ВА
больше 10 000
Code: 4820120220432
The relay monitors voltage in a single-phase 230 V network and disconnects the load when the parameters go outside the set limits. Suitable for installation in a distribution board on a 35 mm DIN rail.
1,604.00 ₴
On Order
Delivery across Ukraine within 5 days from the purchase date.
Pay for orders via Liqpay and plata by mono services.
100% certified products. Service and support.
ZUBR D50 is a single-phase voltage relay designed to protect electrical equipment from excessive voltage fluctuations in a 230 V network. When the mains voltage goes beyond the preset upper or lower limits, the device disconnects the load and helps prevent damage to household and other single-phase appliances. This operating principle makes the relay suitable for apartments, private houses, small commercial premises, and power lines feeding equipment that is sensitive to unstable voltage.
The model is rated for a current of 50 A, with a maximum permissible current of 60 A. The connected load power is up to 11,000 VA, so the relay can be used in circuits with increased power demand within a single-phase supply system. Installation is carried out on a DIN rail, which allows the device to be integrated into a standard distribution board together with other modular equipment. The mounting format is intended for a 35 mm DIN rail.
In terms of functionality, the relay monitors the upper and lower voltage thresholds and, after the mains parameters return to normal, applies a restart delay before reconnecting the load. The delay time can be adjusted from 3 to 600 seconds. This feature is useful for loads that should not switch on immediately after a brief power restoration, such as refrigerators, air conditioners, and heat pumps. The digital display shows the voltage value and service information, making it easier to monitor operation.
The housing is made of non-flammable polycarbonate, which supports safe operation. The circuit uses EPCOS capacitors, and control is performed by three buttons. This version does not include thermal protection, TrueRMS measurement, or a professional tripping delay function, so it is intended for basic voltage monitoring in single-phase networks with the option to set thresholds and restart timing.
Категория продукции
Реле напряжения
Ток, А
50
Способ монтажа
На DIN-рейку
Количество фаз
1 ф. (230 Вольт)
Термозащита
Нет
TrueRMS
Нет
Проф. задержка отключения
Нет
Мощность, ВА
больше 10 000
Есть отзывы
Да
Есть вопросы
Да
0 reviews
No reviews for this product yet. Be the first!